Setup menus
DIF (This menu appears only when the AJ-YAD120AG board is installed.)
ItemSetting
Description of settings
SuperimposedSuperimposed
No.No.
displaydisplay
880 DIF SPEEDFor setting the transfer speed of the digital video interface output.
0000S1000: 100 Mbps<Note>
0001S2001: 200 MbpsWhen S100 has been selected as this itemOs setting, DVCPRO
0002S4002: 400 MbpsHD format signals cannot be input or output.
882 DIF IN CH00000For setting the input channel.
::0 to 63: The input channel is fixed at the channel corresponding to the number
006363specified.
0064AUTO64:The input channel is not fixed at the channel corresponding to the number
specified. The input channel is initialized to 63 when the power is turned on.
883 DIF OUT CH00000For setting the output channel.
::0 to 63: The output channel is fixed at the channel corresponding to the number
006363specified.
0064AUTO64:The output channel is not fixed at the channel corresponding to the number
specified. The output channel is initialized to 63 when the power is turned on.
886 DIF CONFIG0000DFLTMenu item for expansion purposes.
00011Normally, use DFLT as the setting.
::
0255255
890 DIF AUD OUTFor setting the audio channels to which the signals from the digital video interface
are to be output in the DV format when a DVCPRO HD tape or 50M format tape is
played back.
0000CH1/20: CH1 and CH2
0001CH3/41: CH3 and CH4
891 DIF DV AUDIOFor setting forcible audio mode conversion when a DV tape is played back and the
audio signals are output in the DV format.
0000THRU0: Normal setting (the signals simply pass through).
0001LOCK1: Forcible conversion to the LOCK mode (no frequency conversion)
0002LOCK482: Forcible conversion to 48kHz/2CH/LOCK.
894 HD>DIF OUTFor setting the format of the signals to be output from the digital video interface
when a DVCPRO HD tape is played back or the E-E mode is established (while the
AJ-YA120AG board is installed).
0000HD0: DVCPRO HD
000150M1: DVCPRO50
0002DV2: DV
895 50M>DIF OUTFor setting the format of the signals to be output from the digital video interface
when a 50M format tape is played back.
000050M0: DVCPRO50
0001DV1: DV
<Note>
When DV is selected as this itemOs setting, the closed caption signals and time
code (VITC) signals in the vertical blanking period are transmitted, but none of the
other signals in the vertical blanking period are transmitted.
896 25M>DIF OUTFor setting the format of the signals to be output from the digital video interface
when a 25M format tape is played back.
000025M0: DVCPRO
0001DV1: DV
899 DIF SUPERFor setting whether the superimposed display is to be output from the digital video
interface when the format is converted (from HD to 50M, from HD to DV or from
50M to DV).
0000OFF0: The superimposed text is not displayed.
0001ON1: The superimposed text is displayed.
<Notes>
The following settings are recommended when a format other than DVCPRO HD is selected as the format of the signals to be output and an
external unit is connected to the DV connector.
O Menu item No.022 [PB FORMAT]: MANUAL
O� indicates the factory setting.
O Menu item No.023 [FORMAT SEL]: Format of the tape inserted in the unit
49 |
ACEC
PANASONIC
