Starting Up and Closing Down the System
$ System Start Up $ System Shutdown/Power Off
Follow the steps outlined below to start up the system. Follow the steps outlined below to shut down the
system and turn off the power. (See page 21.)
1. Install the optional board. (See page 31.)
1. Refer to the display panel menu flowchart to display
2. Install the HDD for data. (See page 36.) the final setting menu (7).
3. Connect the FC cable between the Fibre Channel
SSEELLEECCTT:: SSEERRVVEERR SSHHUUTTDDOOWWNN 33
connectors [RAID] and [HOST].
SSEETT oorr CCAANNCCEELL44
4. Connect power cord and signal line. 7
Connect the power cord to AC power socket for thePress cursor button [#] or [2], select SERVER
power supply unit installed. SHUTDOWN, and press the [SET] button.
5. Turn the POWER switch on the front panel to ON. SSHHUUTTDDOOWWNN
When the power switch is set to ON, the powerWWaaiitt aa mmoommeenntt,, pplleeaassee
supply LED above the switch lights.
7
<Wait a moment, please> is shown on the display.
6. Startup is completed when the channel status is
shown on the front panel display.
Check the setting of each channel.SSHHUUTTDDOOWWNN
IItt iiss nnooww ssaaffee ttoo ttuurrnn ooffff
""""""""""""""""""""""""NNOOWW BBOOOOTTIINNGG""""""""""""""""""""""""
7
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXConfirm that the display has changed from <Wait a
moment, please> to <It is now safe to turn off>,
7
then turn the power switch to OFF.
CCHH11 CCLLIIPP00000011 0000::0000::0000::0000 ((CCTTLL11)) ccRREEWW
SSDDTTII II//OO LLOOCCAALL --DDFF-- FF55::MMEENNUU44Never turn off the power supply while the unit is
running.
Never turn off the power supply during startup.Otherwise internal data might be destroyed.
Otherwise internal data might be destroyed.
16 |
ACEC
PANASONIC
