59054-gb.fm5 Page 10 Tuesday, April 10, 2001 3:41 PM
BEFORE USING THE GLASS CERAMIC HOB
? To make the most of your new appliances read the
users instructions carefully and keep them on
hand for consultation in the future.
INSTALLATION
Cooktop
The cooktop must be set into a worktop
between 20 mm and 50 mm thick. There must
be nothing between the cooktop and the oven
(cross rails, brackets, etc.).
If the cooktop is to be installed next to a
column unit, leave a distance of at least
100 mm from the edge of the cooktop to the
side of the column unit.
Cut an opening in the worktop of the dimensions
shown in the Product Description Sheet supplied
separately.
N.B.: Remove the protective film before installing the
cooktop.
If the worktop is made of use wood, the supplied
spring clips and screws.
1. Position the 4 clipD) as s (shown and at the
specified dimensions
2. Secure the clips using Escrews ().
3. Fit the cooktop into the worktop.
If the worktop is made of marble, ceramics,
natural stone, , the cooktetc.op must be secured
with brackets F) co( de 4819 404 78697 (to be
requested from After-Sales Service).
1. Fit the cooktop into the worktop.
2. Position the 4 braFcket) as shs ( own in the figure,
in accordance with the thickness of the worktop.
3. Fix the 4 screws (G ) in holes (H).
10 |
ACEC
WHIRLPOOL
