GBINSTRUCTION ON MOUNTING AND USE
Consult the designs in the front pages referenced in the text bywith denatured alcohol or neutral liquid detergents. Avoid
alphabet letters. Closely follow the instructions set out inabrasive detergents.
this manual. All responsibility, for any eventual inconveniences,Failure to carry out the basic standards of the cleaning of the
damages or fires caused by not complying with the instructionscooker hood and replacement of the filters may cause fire risks.
in this manual, is declined.
Grease Filter - may be one of the following types:
The cooker hood has an upper air duct B1 and an optional rearPaper filter must be replaced once a month or if coloured on
air duct B2*, for external fumes exit.the top side, when the coloration is evident via the holes in the
Select the suitable air duct and apply the flange C supplied,grill.
ensure to close the unused hole duct with tap D* supplied ifSponge filter should be washed once a month and replaced
provided.every 5/6 washes.
Metallic filter must be cleaned once a month with suitable
Caution! In some models the rear hole duct is not easilydetergents either by hand or in dishwasher (65°C).
accessible, even when the tap (if mounted) is removed, in thisWhen washed in a dish washer, the grease filter may discolour
case remove the plastic piece E1 or E2 that is blocking the holeslightly, but this does not affect its filtering capacity.
duct, by unwinding using pliers and cutter. Check that the filter/In order to remove the grease filter open the grill via the P hooks
suction selector (inside the cooker hood) G is in the suctionand free the R1 or R2 stoppers.
(A) position. In the case where it is not possible to dischargeThe self-supporting metal filter does not include a support
the cooking fumes externally, the cooker hood may be used ingrill, in order to remove the filter - pull the release springs P4
the filter version by fixing a carbon filter, the fumes and vapoursbackwards and slide the filter downwards.
are recycled via the anterior grill placed above the control panel.Attention! the metal filter may discolour if washed in dishwasher
Check that the suction/filter selector is in the filter (F)but the filtering performance is unaltered.
position.
The models provided without suction motor may function onlyCarbon Filter - it may be one of the following types:
in the suction version and must be connected to a peripheralRectangular S1 or S2 or S3: to be replaced every 6 months
suction unit (not supplied).Mounting (S1 or S2) : insert the rear side T and hook further
to the front (U).
Installation - Do not tile, grout or silicone this appliance to the wall.Mounting (S3): Remove the cover W by rotating the O knobs
Surface mounting only. Do not fix chimney flue to furniture or flyto 90° , then close the cover. Proceed in the inverse for
over shelves unless the chimney flue can be easily removed,dismounting.
in case maintenance is ever required. The cooker hood mustCircular (V1-V2-V3-various models): to be replaced every
be placed at a minimum distance of 60 cm from the cooking plane4 months.
for electric cookers and 75cm for gas or mixed cookers.Bayonet mount position the filter in the middle of the motor
If the instructions for installation for the gas hob specify a greaterprotection grill covering ensuring that the reference to X1 or X2
distance, this has to be taken into account.or X3 on the carbon filter match the Y1 or Y2 references on the
The cooker hood may be installed on the wall or on the baseconveyor, then turn clockwise; in case of dismounting turn
of a cabinet; if supplied, use the hole gauge H to drill the correctanticlockwise, if provided with a Z tape remember to gently lift
distance, otherwise lean the cooker hood on the wall or on thefirst.
base of the cabinet and mark the holes with a pencil.
Replacing lightbulbs 40W - Unscrew the damaged light bulb and
Wall mounting - Insert the wall screw anchors J in the drilled holesreplace with an incandescent oval light bulb with a maximum
and the two K screws in the upper drill holes, remove the grillof 40W E14. Remove the grill in order to reach the light bulb area.
and hook the cooker hood to the 2 screws, finally from the inside,
insert the third screw L and lock them all in.Replacing the halogen bulbs - Access the light compartment -
extract the lamp cover by levering it off with a small screwdriver
Cabinet fixing - Affix the cooker hood with the 4 M screws fromor similar tool.
inside the cabinet.Warning! Prior to touching the light bulbs ensure they are cooled
down. Replace the damaged light bulb. Only use halogen bulbs
Electrical connection - The electrical tension must correspondof 20W max (G4), making sure you do not touch them with your
to the tension noted on the label placed inside the cooker hood.hands. Close the lamp cover (it will snap shut).
Connect the electrical plug, where provided, to the an easily
accessible outlet in conformity with local standards in force.Caution - This appliance is designed to be operated by adults.
Where an electrical plug is not provided (for direct connectionChildren should not be allowed to tamper with the controls or play
to electrical network) place a standards approved bipolar switchwith the appliance.
with an aperture distance of not less than 3mm (accessible) fromDo not use the cooker hood where the grill is not correctly fixed!
the contacts.The suctioned air must not be conveyed in the same channel
Security advice:Only specialized technicians can replaceused for fumes discharged by appliances powered by other than
electric cable in case of damage.electricity. The environment must always be adequately
aerated when the cooker hood and other appliances powered
Operation - The control panel is situated on the front of the cookerby other than electricity are used at the same time. Flambé
hood and is equipped with various suction speeds. Use thecooking with a cooker hood is prohibited. The use of a free flame
highest speed for situations of high level vapour concentrationis damaging to the filters and may cause fire accidents, therefore
in cooking. Always open the vapour collector N*. It isfree flame cooking must be avoided. Frying of foods must be
advisable to switch on the suction at least 5 minutes prior tokept under close control in order to avoid overheated oil catching
cooking and leave it in operation for 15 minutes approximatelyfire. Carry out fumes discharging in accordance with the
after cooking is terminated.regulations in force by local laws for safety and technical
restrictions.
Maintenance - Prior to any maintenance operation ensure that
the cooker hood is disconnected from the electrical outlet.
Cleaning - The cooker hood should be cleaned regularly* Not available on all models.
internally and externally. For cleaning use a cloth moistened |