' - !"#
Main Sub Content
codecode
2601Manual feed setup
(Operation/Procedure)
1. When this simulation is executed, the currently set bypass code number is displayed.
2. Enter the code number corresponding to the bypass and press the START key, and the setting will be changed.
Code numberBypass
0Single bypass
1Multi bypass
02SPF setup
When this simulation is executed, the currently set SPF code number is displayed. Enter the code number of the SPF to be set and press
the PRINT switch. The setup is changed.
Code numberSPF
0Without SPF
1With SPF (Setup is required when installing FAX.)
2With RSPF
03Second cassette setup
(Operation/Procedure)
1. When this simulation is executed, the currently set code number of the second cassette is displayed.
2. Enter the code number and press the start key. The setting is changed.
Code numberSecond cassette
0Without second cassette
1With second cassette
04Machine duplex setup
(Operation/Procedure)
1. When this simulation is executed, the currently set duplex code number is displayed.
2. Enter the code number corresponding to the duplex and press the ENTER key, and the setup will be changed.
Code number Duplex
0Without Duplex
1With Duplex
06Destination setup
(Operation/Procedure)
1. When this simulation is executed, the currently set destination code number is displayed.
2. Enter the code number corresponding to the destination and press the START key, and the setting will be changed.
Code number Destination
0Inch series
1EX AB series
2Japan AB series
07Machine conditions check
(Operation/Procedure)
When this simulation is executed, the current machine setting is displayed.
The machine type is shown with the lamp display.
AL series: None
CPM Copy quantity displayAR-A series: AE mode lamp ON
AR-B series: TEXT mode lamp ON
10 cpm 10
DM series: Photo mode lamp ON 12 cpm 12
15 cpm 15
AL-1551 SIMULATION, TROUBLE CODES 10-5 |
ACEC
SHARP
