Code
Function (Purpose)PurposeSectionItem
Main Sub
2621. Used to set the paper size of SettingPaper feedSpecifications
the large capacity tray.
(When the paper size is
changed, the software setup
must be changed
accordingly with this
simulation.)
2. Used to detect 8.5 " x 13"
(INCH Series) paper or
documents and to set the
display mode. (All paper
feed modes)
3. Used to set the display form
of the paper kind in the
manual paper feed mode.
3Used to set the auditor SettingAuditorSpecifications
specification mode. Setting
must be made according to the
use conditions of the auditor.
5Used to set the count mode of SettingSpecifications Counter
the total counter and the
maintenance counter.
6Used to set the destination SettingSpecifications Destination
specifications (paper, fixed copy
magnification ratios, image
(process) correction, machine
operation in case of an error,
etc.).
10 Used to set the trial mode of the SettingScannerSpecifications
network scanner.
18 Used to set YES/NO of toner SettingSpecifications Operation mode
save operation. (This simulation (Common)
is Enable only for Japan and UK
versions. It depends on SIM 26-
6 (Destination) setting.
For the other destinations, the
same setting can be made by
the user program P22.
(Effective only in the
monochrome copy mode)
35 Used to set whether the trouble SettingSpecifications
history display by SIM 22-4 is
displayed as one trouble or as
the accumulated number of
continuous troubles when two
or more troubles of same kind
occur continuously.
38 Used to set "Continue/SettingSpecifications
Discontinue" of printing when
toner life is reached.
41 Used to set Enable/Disable of SettingSpecifications
AMS operation in the center-
binding mode.
52 Used to set YES/NO of count up SettingSpecifications Operation mode
of non-copy paper (cover or
insertion paper).
53 Used by the user to set Enable/SettingSpecifications Operation mode
Disable auto color calibration
(auto adjustment of color
balance and density)
57 Used to set the model name for SettingSpecifications
use as the status information.
65 Used to set the finisher alarm SettingSpecifications
mode.
AR-C260/C260M SIMULATION 9 - 6 |
ACEC
SHARP
