INSTALLATION
Install the appliance away from heat sources.
Install the appliance in a dry, well-ventilated
place.
Ensure that the appliance is level. Adjust the
front feet if necessary.
Leave at least 5 cm clearance above the
appliance.
The sides of some models are extended at
the rear so the appliance can be placed
directly against the rear wall. Otherwise, fit
the spacers (if supplied) on the upper part of
the condenser at the rear of the appliance.
For models without spacer walls, the
distance between the unit and the wall must
be at least 4.5 cm.
Clean the inside (see the? chapteCare and r
Maintenance?).
Fit the accessories supplied.
Remove the compressor locking pin
(according to the model).
Electrical connection
Electrical connections must be made in
accordance with local regulations.
Ensure that the voltage indicated on the
appliance data plate corresponds to the
domestic supply voltage.
Regulations require that the appliance is
earthed.
The Manufacturer declines all liabilities
for injury to persons or animals or
damage to property resulting from failure
to observe these regulations.
If the plug and socket are not of the same
type, have the socket replaced by a qualified
electrician.
Do not use extension cables, multiple
sockets or adapters.
20 |