AV-27320
AV-27330
AV-27S33
ADJUSTMENT OF WHITE BALANCE
Measuring
ItemTest pointAdjustment partDescription
instrument
WHITESignalR CUTOFF (S11)1. Receive the black and white signal ( color off ).
BALANCEgeneratorG CUTOFF (S12)
2. Select the [LOW LIGHT] MODE from the SERVICE MENU.
(Low Light)B CUTOFF (S13)
adjustment3. Set the initial setting value of ?R CUTOFF?, ?G CUTOFF?
?B CUTOFF? and BRIGHT.
BRIGHT(S01)
4. Display a single horizontal line by pressing the ```` key of the
SCREEN VR
remote control unit.
[ in HVT]
5. Turn the screen VR all the way to the left.
6. Turn the screen VR gradually to the right from the left until
either one of the red, blue or green colors appears faintly.
7. Adjust the two colors which did not appear until the single
horizontal line that is displayed becomes white using the cccc to
[LOW LIGHT]
hhhh keys of the remote control unit.
8. Turn the screen VR until the single horizontal line is displayed
faintly.
9. Press the aaaa key to cancel the single horizontal line mode.
10. Adjust the BRIGHT level to become the black component
shines white slightly.
11. Confirm that whether the color ingredient of R,G,or B is visible
BRIGHT***to the black component, which shines white slightly
******12. When the color ingredient can be seen, two colors other than a
visible color are adjusted, and it is made to look white.
13. Return the value of BRIGHT to initial setting value.
IThe bbbb EXIT key is the cancel key for the WHITE BALANCE.
VariableInitial setting
REMOTE CONTROL UNIT
No.Setting item
rangevalue
H.LINE ONH.LINE OFFEXIT
S11R CUT OFF0^25550
123
S12G CUT OFF0^25550
R CUTOFFG CUTOFFB CUTOFF
456S13B CUT OFF0^25550
R CUTOFFG CUTOFFB CUTOFF
S01BRIGHT0^12764
789
No.51937 23 |
ACEC
JVC
