JVC AV28X25EIGY Repair Manual

AV32X25EUS / AV32X250EUS
AV32X25EIGY / AV32X25EKGY
AV28X25EUS / AV28X25EIGY
AV28X25EKGY
REMOVING THE CRT
 Replacement of the CRT should be performed by 2 or more
persons.CRT CHANGE TABLE
" After removing the cover, chassis etc.,
1. Putting the CRT change table on soft cloth, the CRT change table
should also be covered with such soft cloth (shown in Fig.8).
APPROX.
2. While keeping the surface of CRT down, mount the TV set on the35cm
CRT change table balanced will as shown in Fig.9.
3. Remove 4 screws marked by arrows with a box type screw driver
CLOTH
as shown in Fig.9.
" Since the cabinet will drop when screws have been removed, be
sure to support the cabinet with hands.
4. After 4 screws have been removed, put the cabinet slowly on
cloth (At this time, be carefully so as not to damage the frontFig. 8
surface of the cabinet) shown in Fig.10.
" The CRT should be assembled according to the opposite
sequence of its dismounting steps.CRT
 The CRT change table should preferably be smaller that the CRT
surface, and its height be about 35cm.
CRT
CHANGE
TABLE
BOX
TYPE
SCREW
DRIVER
Fig. 9
CRT
CABINET
CRT
CHANGE TABLE
Fig. 10
10No. 51994