AV-36360 AV-36S36
AV-36330 AV-36S33
AV-36320
ADJUSTMENTS
BASIC ADJUSTMENT
Measuring
ItemTest pointAdjustment partDescription
instrument
Check ofDC Voltmeter 1 : TP-911. Receive the black and white signal. (color off)
B1 POWER3 : TP-E(#)2. Connect the DC voltmeter to B1 connector 1 pin (TP-91) and
SUPPLY
TP-E(#).
B1 connector
3. Confirm that the voltage is DC134V?2V.
MAIN VCOSignalVCO (MAIN)" Under normal conditions, no adjustment is required. And it must
adjustmentgenerator[SERVICE MENU]not adjust without signal.
1. Receive the NTSC broadcast.
CW TRANSF.
Remote2. Select the 10 VCO mode from the SERVICE MENU.
[MAIN PWB]
control unit
3. It checks that turn the CW TRANSF. and the character of
?HIGH LEVEL ? changes the color.
4. Next, it check that turn the CW TRANSF. on the contrary and
the color of ?LOW LEVEL? changed.
5. At this time, it checks that ?SYNC? is ?YES?.
6. Turn the CW TRANSF. and it is made for the character of
?REFERENCE LEVEL? to become green. Again, it checks that
?SYNC? is ?YES?.
TUNER MAIN
HIGH LEVEL
REFERENCE LEVEL GREEN
LOW LEVEL
SYNC NO
SUB VCORemoteVCO (SUB)" This adjustment is only for AV-36360 and AV-36S36.
adjustmentcontrol unit[SERVICE MENU]" Under normal conditions, no adjustment is required. And it must
Only fornot adjust without signal.
AV-36360SUB CW TRANSF.
1. Receive the NTSC broadcast.
AV-36S36
[PIP PWB]
2. Push the PIP key on the remote control unit. And display any
broadcast program in the PIP screen that difference from MAIN
screen.
3. Select the 10 VCO mode and switch the SUB mode by pressing
the CURSOR / key.
4. It checks that turn the SUB CW TRANSF. and the character of
?HIGH LEVEL ? changes the color.
5. Next, it check that turn the SUB CW TRANSF. on the contrary
and the color of ?LOW LEVEL? changed.
6. At this time, it checks that ?SYNC? is ?YES?.
7. Turn the SUB CW TRANSF. and it is made for the character of
?REFERENCE LEVEL? to become green. Again, it checks that
TUNER SUB
HIGH LEVEL?SYNC? is ?YES?.
REFERENCE LEVEL GREEN
LOW LEVEL
SYNC NO
24No. 51950 |
ACEC
JVC
