Appendix
Additional Information
Troubleshooting
Common
SymptomCauseAction (See)
Power doesn?t turn on.Leads and connectors are incor-Confirm once more that all connections are
The unit doesn?t operate.rectly connected.correct.
The fuse is blown.Rectify the reason for the fuse blowing, then
replace the fuse. Be very sure to install the
correct fuse with the same rating.
Noise and other factors are causingPress RESET. (Page 11)
the built-in microprocessor to oper-
ate incorrectly.
Playback is not possible.The disc is dirty.Clean disc. (Page 108)
The loaded disc is a type this unitCheck what type the disc is.
cannot play.
Non compatible video system discChange to a disc compatible to your video
is loaded.system.
No sounds are heard.Cables are not connected correctly. Connect the cables correctly.
The volume level will not rise.
The unit is performing still, slow mo-There is no sound during still, slow motion or
tion or frame-by-frame playback.frame-by-frame playback.
There is no picture.The parking brake cord is not con-Connect a parking brake cord, and apply the
nected.parking brake.
The parking brake is not applied.Connect a parking brake cord, and apply the
parking brake.
The iconis displayed, and op-The operation is prohibited for theThis operation is not possible.
eration is not possible.disc.
The operation is not compatibleThis operation is not possible.
with the disc?s organization.
The picture stops (pauses) andReading of data has become impos-After pressing g once, start playback once
the unit cannot be operated.sible during playback.more.
There is no sound.The volume level is low.Adjust the volume level.
Volume level is low.
The attenuator is on.Turn the attenuator off.
There is audio and video skip-The unit is not firmly secured.Secure the unit firmly.
ping.
The picture is stretched, the as-The aspect setting is incorrect forSelect the appropriate setting for your display.
pect is incorrect.the display.(Page 93)
When the ignition switch isThe unit is confirming whether aThis is a normal operation.
turned ON (or turned to ACC),disc is loaded or not.
the motor sounds.
Nothing is displayed.The rear view camera is not con-Connect a rear view camera.
The touch panel keys cannot benected.Press V.ADJ to return to the source display
used.AV input 2 is at incorrect setting.and then select the correct setting for AV
input 2. (Page 89)
104En |