AVR 635 OM 10/17/05 9:23 AM Page 14
MAIN REMOTE CONTROL FUNCTIONS
b Speaker Select Button: Press this button g Dolby Mode Select Button: This button is used
to begin the process of configuring the AVR 635Osto select from the available Dolby Surround modes.
bass management system. Then press the �/UEach press of this button will select one of the Dolby
Navigation Button o to select the channel youPro Logic II, Pro Logic IIx or Dolby Virtual Speaker
wish to set up. Press the Set Button q and modes, as available for the number of speakers in your
then select another channel to configure. When allsystem. When a Dolby Digital-encoded source is in
adjustments have been completed, press the Setuse, the Dolby Digital mode may also be selected.
Button q twice to exit the settings and return to(See page 34 for the available Dolby surround
normal operation. (See page 27 for more informationmode options.)
on speaker setup.)h 6-Channel/8-Channel Input Select: Press this
c Memory Button: Press this button to enter abutton to select the device connected to the 8-Channel
radio station to the AVR 635Os preset memory. First,Direct Inputs. (See page 32 for information.)
tune the desired station, and then press this button.
i Mute Button: Press this button to momentarily
Within 5 seconds of when you see the stationOs silence the AVR 635 or TV set being controlled,
frequency flash in the Upper Display Line # and depending on which device has been selected.
in the on-screen display, press the numeric keys
for the preset number between 01 and 30 that youj Lens: The infrared emitters behind the plastic
wish to assign to the station. (See page 37 for morelens at the top of the remote communicate the remote
information.) codes to the AVR 635. Be certain that the lens is not
d Stereo Mode Select Button: Press this buttoncovered when using the remote, and point the lens
to select a stereo listening mode. When the button istoward the AVR for best results. In learning mode, the
pressed so that SURROUND OFF appears inremote receives IR codes to be learned through a
the Lower Display Line$, the AVR will operate sensor behind the lens.
in a bypass mode with true, fully analog, two-channelNOTE: DO NOT remove the rubber plug that covers the
left/right stereo mode with no surround processing orjack on the upper right side of the remote. The jack is
bass management, as opposed to other modes wherenot active and is reserved for future use.
digital processing is used. When the button is pressed
so that SURROUND OFF appears in the Lower
Display Line$, and the DSP and Surround Off
Surround Mode Indicators % are lit, you will enjoy
a two-channel presentation of the sound, along with
the benefits of bass management. Depending on
whether your system is configured for 5.1 or 6.1/7.1
channels, the next press of the button will cause either
5 CH STEREO or 7 CH STEREO to
appear, and the stereo signal will be routed to all five
(or seven) speakers. (See page 34 for more informa-
tion on stereo playback modes.)
e DTS Neo:6 Mode Select Button: Press this
button to select a DTS Neo:6 mode. (See page 34
for the available DTS Neo:6 options.)
f DTS Digital Mode Select Button: When a
DTS-encoded digital source is playing, each press of
this button will scroll through the available DTS modes.
The specific choice of modes will vary according to
the type of encoding on the disc and your systemOs
speaker configuration. When a DTS source is not in
use, this button has no function. (See page 34 for the
available DTS digital options.)
14 MAIN REMOTE CONTROL FUNCTIONS
474549
333324353637462627383944282524404148424330312930233122213736353433363534333238
404146454443
2928203231123739424847495051 |
ACEC
HARMAN KARDON
