30106020GB.fm Page 8 Wednesday, March 21, 2007 12:09 PM
CARE AND MAINTENANCE
Appliance exterior and control panelDoor seal
Can be washed down with a soft, damp cloth. Clean with a damp cloth when necessary.
A little neutral detergent (non abrasive) can also Check the condition of the door seal periodically.
be used.
Dry with a soft cloth.Filter
Check and clean the filter regularly, at least two
Appliance interioror three times a year (see ?Removing The Filter/
After each washing, leave the door open for some Draining Residual Water?).
time to allow the inside of the appliance to dry.
Water supply hose(s)
If you never or seldom wash your laundry at
95°C, we recommend to occasionally run a 95°C Check the hose(s) regularly for brittleness and
programme without laundry, adding a small cracks.
amount of detergent, to keep the interior of the Regularly check and clean the mesh filter inside
appliance clean.the inlet hose (see ?Cleaning the mesh filter in
the water supply hose(s)?).
Do not use flammable fluids for cleaning the appliance.
Detergent dispenser
Clean the dispenser drawer and the dispenser compartment
regularly, at least three or four times a year, to prevent
detergent build-up:
1. Press the release lever in the main wash chamber downward and
remove the dispenser drawer from the dispenser compartment.
2. Remove the cover grid from the softener chamber. Remove the
separator from the main wash chamber by pulling it upward (see
dark arrows).
3. Wash all the parts under running water.
4. Clean the dispenser compartment with a damp cloth.
5. Refit the separator and the cover grid in the dispenser drawer
and push the drawer back into the dispenser compartment.
GB 8
Black process 45.0° 100.0 LPI |
ACEC
WHIRLPOOL
