00000gb.fm5 Page 11 Wednesday, May 10, 2000 3:42 PM
LIQUID BLEACH (HYPOCHLORITE)
Laundry with heavy stains may beWarning: Bleaching is only possible in a cold
PRE-BLEACHED in the machine prior to carrying wash, otherwise your laundry and your appliance
out a normal wash programme. Proceed by will be damaged.
diluting the bleach in approximately 1l water
Poor the diluted bleach into chamber and start
outside of the washing machine in a small the machine.
container.After this prebleach wash, do a normal wash, in
For a machine with temperature selector:which more not bleachable laundry can be added.
? Turn the programme selector to programmAdd detergent into chambee4.r and start a wash
? Turn the temperature selector to Min.programme. For this subsequent wash a lower
Warning: Bleaching is only possible in a cold temperature wash programme (for example 40°C)
wash, otherwise your laundry and your appliance can be sufficient because of the pre-bleach
treatment. In this way energy can be saved.
will be damaged.
For a machine without temperature selector:Note:
? Turn the programme selector to programme5.Bleach should only be used with bleachable
fabrics.
? Press the special option button ?cold wash?
(ifavailable).
DYEING
Commercially available products usually consist ? Only use products designed for use in
of a dye colour, fixing agent and salt.washing machines.
Pour the dye colour, fixing agent and salt directly ? Follow the manufacturer?s instructions.
into the empty drum, and only then load the ? Plastic and rubber components of the
laundry.machine can be stained by dyes.
REMOVING THE FILTER
WHEN TO REMOVE THE FILTER
? Check and clean the filter at least 2 or 3 times
a year.
? When the appliance does not drain or spin
properly.
? When the pump is blocked by an object
(buttons, coins, safety pins).
Important: M ake sure that the water has
cooled before draining.
REMOVING THE FILTER
1. Switch off the appliance.
2. Open the filter cover with a coin.2
3. Place a tray or container beneath the cover.
4. Slowly turn the filter anticlockwise without
unscrewing it completely.6
5. Wait until all the water has drained off.
6. Now unscrew the filter completely and
remove it.
7. Remove any foreign material from the filter.
8. Check that the pump rotor moves freely.
9. Insert the filter and screw it in clockwise until
it locks.
10.Pour 1/2 litre of water into the detergent 4
drawer and check that water does not leak
from the filter.
11.Close the cover.
11 |
ACEC
IGNIS
