Section
09Installation
ImportantInstalling the hide-away unit
! Check all connections and systems before1 Attach the mounting brackets to the
final installation.hide-away unit.
! Do not use unauthorized parts. Use of un-
authorized parts may cause malfunctions.1
! Consult your dealer if installation requires dril-
ling of holes or other modifications to the vehi-
cle.
! Install the unit where it will not get in the dri-
ver?s way and will not injure passengers if
there is a sudden stop.
! When mounting this unit, make sure none of
the leads are trapped between this unit and
the surrounding metalwork or fittings.
! Do not mount this unit near heater outlets3
where it would be affected by heat, or near the2
doors where rainwater might splash onto it.
! Before drilling any mounting holes, always1 Hide-away unit
check behind where you want to drill the2 Screw (4 mm � 8 mm)
holes. Do not drill into the gas line, brake line,3 Mounting bracket
electrical wiring or other important parts.
! If this unit is installed in the passenger com-2 Install the hide-away unit in the car.
partment, anchor it securely so it does not2
break free while the vehicle is moving, caus-
ing injury or an accident.
! If this unit is installed under the front seat,
make sure it does not obstruct seat move-1
ment. Route all leads and cords carefully
around the sliding mechanism so they do are
not caught or pinched in the mechanism and
cause a short-circuit.
4
3
1 Hide-away unit
2 Tapping screw (4 mm � 12 mm)
3 Drill a hole of 2 mm to 2.5 mm
4 Car mat or chassis
32En |
ACEC
PIONEER
