Powered SubwooferBASS2/BASSWAVE
DISASSEMBLY PROCEDURE
To Access Amp. Circuit BoardsNOTES:
1.Remove(4)basescrews;removebase.1.Theupperwooferisnon-serviceable.Order
replacement cabinet/upper driver assy.
2.Remove(2)large1/4-20Torx#30amp(Part # BASSWAVEENCLKIT)
mounting screws from amplifier bottom.
2.ANEWAMPGASKET,(Part#75140),between
3.Removeampassemblyfromcabinet;unplugtheamp and cabinet is recommended to ensure
(2) output wires.airtight seal if the amplifier is removed for any
reason.
4.Removethe(4)Torx#15screwsfromtopplate.
3.Ifamplifierisservicedforanyreason:afterthe
5.Remove/scrapadhesiveawayfromthestrainstrain relief plug is inserted back in top cover,
relief plug area in the top cover.an adhesive, e.g. hot melt glue, silicon seal, epoxy
6.Prystrainreliefplugfromtopcover;removecover.or similar product must be used on the strain relief
junction to ensure an air tight seal.
To Access Lower Woofer
1.Remove(4)basescrews;removebase.
2.Remove(2)large1/4-20Torx#30ampmounting
screws from amplifier bottom.
3.Removeampassemblyfromcabinet.PACKAGING EXPLODED VIEW
4.Unplugthe(2)wiresfromwoofer;removethe(4)
8 x 3/4 Phillips screws from the inner baffle.
5.Removewoofer.
JBL continually strives to improve its products.
New materials, production methods and design
refinements are introduced into existing models without
notice as a routine expression of our design philosophy.
For this reason, the Bass2/Basswave Subwoofer may
differ in some respect from its published specifications
and descriptions, but will always equal or exceed the
original specifications unless otherwise stated.
2 |