BOSS BR-600 Instruction Manual

BR600_e2 55 Z
8
?
?
?
-?
?e
?
?xýe
Uxý9 V
?p
? 
Recording
If INPUT SELECT [MIC] is lit
Selecting the Recording Trackfig.00-490
1Press either [1]�[7/8] at REC TRACK to select the
recording track.
If a mic is connected either to the MIC1 or MIC2 jack (not
If the button flashes in red, that track is ready for both), the input will be mono, and you can select tracks
recording.using the same procedure as that described in OIf INPUT
fig.00-480
SELECT [GUITAR] is Lit.�
If you have mics connected to both the MIC1 and MIC2
jacks, or if nothing is connected to either of these jacks and
the internal stereo mic is switched on, you can select tracks
The status of each track can be determined from the Section 1
indicator on the button.using the same procedure as that described in OIf INPUT
SELECT [LINE] or [SIMUL] are Lit.�
Off :No recorded data exists on the track.* When mics are connected to both the MIC1 and MIC2 jacks,
Green :Recorded data exists on track.Track 1 is selected as the recording destination for MIC1,
Red :The track is selected for recording.and Track 2 is selected as the recording destination for
If a track with existing data is selected for recording, MIC2.
the indicator will light alternately in orange and green.
If INPUT SELECT [LINE] or [SIMUL] are lit
If INPUT SELECT [GUITAR] is litfig.00-490fig.00-510
or
Since the input is mono, the recording is normally
performed as a mono recording onto one track. Press one of
TRACK [1]�[4] at REC TRACK to select the one track to
which to record.
Since the input is stereo, the recording is normally
However, if you want to record in stereo to increase the performed on two tracks. Press either REC TRACK [1] or [2]
to select tracks 1 and 2, or [3] or [4] to select tracks 3 and 4.
effect of insert effects, you can simultaneously press the [1]
and [2] or [3] and [4], REC TRACK buttons for stereo However, if you want to mix together the left and right
recording onto two tracks.channels being input onto one track, with tracks 1 and 2
fig.00-500
selected, press REC TRACK [1] again to select track 1. (Recording Mono)
Using the same procedure, you can select any track 1 to 4 to
be the track to which to record.
In addition, Tracks 5/6 and 7/8 are stereo tracks, so they
always produce stereo recordings.
(Recording Stereo)
Re
v0.10
In addition, Tracks 5/6 and 7/8 are stereo tracks, so they
always produce stereo recordings.
55