ITEM CONTENTS AND ADJUSTMENT RANGE/SETTINGS
1. APERTURE CONTROL3. sub menu POSITION
Compensates the frequencyItems: Selects the display position of the sub menu
<APERTURE CONTROL>
characteristics of the inputsuperimposed on the screen.
LEVEL :00
video signal. Press the CONTROL FREQ. :HIGHSettings : UPPER/LOWER
sub menu
button to display the setting resetFunctions : UPPER : An adjustment item is displayed on the
menu illustrated on the right.top of the screen.
NOTE :APERTURELOWER : An adjustment item is displayed on the
EXIT: MENU ADJUST:- + SELECT:
CONTROL is notbottom of the screen.
displayed when the
RGB signal is input.4. AREA MARKER
Items: Selects the size marker for the other screen ratio
Item: LEVEL
(aspect) used when the screen ratio is 16:9.
AdjustmentSettings : OFF/16:9/4:3/13:9/14:9/MODE 1/MODE 2
range: 00 ~ +10Functions : OFF: The marker is not displayed.
Function: Adjusts the compensate value. The higher the
16:9/4:3/13:9/14:9: Displays the marker (a white
number is, the larger the compensate value gets.
quadrangle) showing the screen size of each
aspect ratio.
Item: CONTROL FREQ.
MODE 1/MODE 2: Displays no markers because
Settings: HIGH/LOW/OFF
these settings will be used for function expansion
Function: Adjusts the frequency compensation.
in the future.
HIGH : Compensates the high frequencies.
LOW : Compensates the low frequencies.I AREA MARKER is displayed when a 16:9 picture such as
1080i/1035i/720p etc. is displayed or the picture is
OFF : Deactivates the aperture compensation.
switched to the 16:9 screen ratio by pressing the ASPECT
Item: sub menubutton.
Adjustment range/I To actually display the marker, the AREA MARKER
Settings: Same as LEVEL or CONTROL FREQ.button on the monitor needs to be pressed so that it is
Function: Performs the LEVEL or CONTROL FREQ.illuminated.ENGLISH
settings in a single-line display. The display
position depends on the Osub menu POSITION�
setting.
Item: reset
Function: Sets the LEVEL and CONTROL FREQ. values to
factory-preset ones.
2. SLOT CONDITION16:94:3
Displays the status of the input
<SLOT CONDITION>
cards installed in each of the
INPUT A : VIDEO-1
input card slots. Press the INPUT B : VIDEO-2
INPUT C : COMPO.
button to display the settingINPUT D : RGB
INPUT E : NO SLOT
menu illustrated on the right.INPUT F : NO SLOT
EXIT: MENU
14:913:9
Items: INPUT A:/INPUT B:/INPUT C:/INPUT D:/INPUT
E:/INPUT F:
Settings: VIDEO-1/VIDEO-2/COMPO./RGB/SDI 1/SDI 2/
HD SDI 1/HD SDI 2/NO SLOT
Function: Displays the status of the input cards installed in
each of the input card slots.
I INPUT A/B corresponds to SLOT 1, INPUT C/D to SLOT 2,
and INPUT E/F to SLOT 3.
I VIDEO-1 or VIDEO-2 shows the video input card is installed.
COMPO. or RGB shows the component/RGB input card.
SDI 1 or SDI 2 shows the SDI input card is installed.
HD SDI 1 or HD SDI 2 shows the HD SDI input card is
installed.
I NO SLOT shows no input cards are installed.
11
ACEC
PANASONIC
