Maintenance Inspections
Maintenance inspections are necessary for the user to use this equipment safely. It is important to keep monitor
functions in good condition at all times through periodical and appropriate maintenance. In order to use this monitor
for a long time, and to make full use of all of its functions, be sure to carry out the following maintenance
inspections.
1. Necessity of periodical maintenance services2. Standard maintenance time guidelines and items
A backlight is used in the liquid crystal panel. This to be performed
part (consumable) deteriorates as time passes, and The following maintenance performance times give
can cause performance levels to drop, or may cause standard guidelines for when to perform maintenance,
a malfunction. and do not indicate the individual lifespan of your
Therefore, in addition to the after-service repairs equipment. Also, note that the deterioration time
performed if a malfunction occurs, it is essential that varies depending on the usage environment and way
general servicing and maintenance servicing are in which the equipment is used.
conducted on a regular basis, to prevent malfunctions
and accidents caused by the deterioration of Periodic maintenance
Part nameQuantity
consumable parts, and to keep the monitor working inspection time
normally. Backlight Replace every 50,000
and liquid 1hours*
crystal panel
FanReplace every 10,000
1
hours
* You cannot replace just the backlight unit on its own.
Specifications
g Generalg Input Connectors
Input powerImage signal input:
VIDEO: Power supply:Power consumption:
1 line, BNC x 2AC:100 V - 240 V, 50/60 Hz1.1 A - 0.6 A
(1 connector with through-out configuration)
DC:12 V (11 V - 17 V)4.5 A
Y/C:
is the safety infomation.1 line, Y/C connector x 2
(1 connector with through-out configuration)
Dimensions:Analog component:
Including stand1 line for YPBPR/RGBS, BNC x 8
430 (W) mm x 323.5 (H) mm x 198 (D) mm(4 connectors with through-out configuration)
[16.9 (W) inches x 12.7 (H) inches x 7.8 (D) inches]However, when input is RGB-COMP. this becomes
Main body only, not including standBNC x 5 (R, G, B, HD, and VD).
430 (W) mm x 309 (H) mm x 81.1 (D) mm(Through-out is not available)
[16.9 (W) inches x 12.2 (H) inches x 3.2 (D) inches]SDI:
Weight:2 line, BNC x 3
Including stand(1 connector with switched-out configuration)
8.1 kg (17.9 lb) Audio input:Pin jack x 2 (stereo)
Main body only, not including standGPI:D-SUB, 9 pins x 1
7.2 kg (15.9 lb) RS-232C:D-SUB, 9 pins x 1
Operating temperature:DC input:XLR, 4 pins x 1
+5 °C to +35 °C (+41 °F to +95 °F)
Operating humidity:g Signal level
20 % to 80 % (no condensation)VIDEO
Storage temperature:EXT SYNC signal level:0.3 Vp-p to 4.0 Vp-p
-20 °C to +60 °C (-4 °F to +140 °F)HD/VD signal level:TTL level
g PanelAUDIO
Size:17.1 typeAUDIO input level:0.5 Vrms
Aspect ratio:15:9Speaker output:0.5 W + 0.5 W
Number of pixels: 1280 x 768 (WXGA)
Display colors:Approx. 16,700,000 colors
View angle:176° up/down, 176° right/left
28 |
ACEC
PANASONIC
