To change the temperature display from °F to °C:To see or change the remaining time (in hours):
1. Turn off the air conditioner. 1. Press TIMER once after it has been programmed. Hour
2. While the air conditioner is off, press and hold down the indicator light will turn on, and display will show remaining
MODE and FAN SPEED buttons while pressing POWER to time.
turn on the air conditioner. 2. While the display is showing the remaining time, you can
NOTE: Follow these same steps to change the temperature press the plus or minus button to increase or decrease the
display from °C to °F.time.
3. After 10 seconds, Hour indicator light will turn off, and Room
Timer delayindicator light will turn on. Display will show the current room
temperature.
To set the Timer for a 1- to 24-hour delay until the air
conditioner turns off (the air conditioner must be On): To operate air conditioner with remote control
1. Press TIMER. Timer indicator light will flash. Hour indicator
light will turn on, and display will show remaining hours NOTE: Remote control may vary in appearance.
before air conditioner will turn off.
2. Press the plus or minus button to adjust the delay time (1 to
24 hours).
3. Press TIMER again or wait 10 seconds. Timer indicator light
will remain on. Hour indicator light will turn off, and Room
indicator light will turn on. Display will show the current room
temperature.
To set the Timer to turn on the air conditioner, keeping
previous settings:
1. Turn off air conditioner.
2. Press TIMER. Timer indicator light will flash. Hour indicator
light will turn on, and display will show remaining hours
before air conditioner will turn on.
3. Press the plus or minus button to change delay time (1 to
24 hours).
4. Press TIMER again or wait 10 seconds. Timer indicator light
will remain on. Hour indicator light will turn off, and Room
indicator light will turn on. Display will show current room
temperature.
To set the Timer to turn on the air conditioner, changing
NOTE: Two AA batteries (not included) power the remote control.
the previous settings:Replace batteries after 6 months of use, or when the remote
1. Turn on air conditioner.control starts to lose power.
2. Adjust Mode to Auto, Cool, Fan Only, or Power Saver.
NOTE: For Auto mode, go to Step 4. To turn the air conditioner on or off:
3. For Cool, Fan Only or Power Saver mode, adjust FAN SPEED Press POWER.
to Turbo, High or Low.
4. Adjust temperature between 64°F (18oC) and 86°F (30oC).
5. Wait 3 seconds before turning off air conditioner.
6. Press TIMER. Timer indicator light will flash. Hour indicator
light will turn on, and display will show remaining hours To select the mode:
before air conditioner will turn on.Press AUTO COOL, COOL, FAN ONLY, or POWER SAVER.
7. Press the plus or minus button to change delay time (1 to Auto Cool?fan speed is adjusted automatically.
24 hours).
8. Press TIMER again or wait 10 seconds. Timer indicator light Cool, Fan Only or Power Saver?you can adjust the fan
speed.
will remain on. Hour indicator light will turn off, and Room
indicator light will turn on. Display will show current room
temperature.
To clear Timer delay program:
NOTE: Air conditioner can be either on or off.
Press and hold TIMER for 3 seconds. Timer indicator light will
shut off.
13 |
ACEC
WHIRLPOOL
