6. Color Reproduction Adjustment
Adjust the color Separation matrix coefficient so that proper color
reproduction is produced.For 510H model
SubjectColor bar chart standard picture frame
Measurement PointVideo output terminal
Measuring Instrument Vectorscope
Adjustment PageF
Adjustment Address34, 36, F5, F6
Specified ValueAll color luminance points should settle
within each color reproduction frame.
Note1: 510H model (CCD-TR57/TR67/TR413PK)
760H model (CCD-TR87/TR414PK/TR917/TR940/
TR940PK)
Switch setting:
1) NIGHT SHOT switch...................................................... OFF
Adjusting method:Burst positon
1) Select page: 0, address: 01, and set data: 01.
2) Select page: 2, address: 01, set data: 3D, and press the PAUSE
button of the adjusting remote commander.For 760H model
3) Select page: F, address: 25, set data: 3F, and press the PAUSE
button of the adjusting remote commander.
4) Adjust the GAIN and PHASE of the vectorscope, and adjust the
burst luminance point to the burst position of the color
reproduction frame.
5) Change the data of page: F, address: 34, 36, F5 and F6, and
settle each color luminance point in each color reproduction
frame.
Note 2:Be sure to press the PAUSE button of the adjusting remote
commander before Changing the addresses. If not, the new
data will not be written to the memory.
6) Press the PAUSE button of the adjusting remote commander.
Processing after Completing Adjustments
1) Select page: 2, address: 01, and set data: 00, and press the PAUSE
button of the adjusting remote commander.Burst positon
2) Select page: 0, address: 01, and set data: 00.
Fig. 5-1-9.
5-18 |
ACEC
SONY
