Indication for CD PlayerIndication for CD Changer
HI TEMPHI TEMP
Y Protective circuit is activated due to high temperature.Y Protective circuit is activated due to high temperature.
- The indicator will disappear when the temperature returns to- The indicator will disappear when the temperature returns to
within operation range.within operation range.
NO DISCERROR - 01
Y No CD is inserted.Y Malfunction in the CD Changer.
- Insert a CD.- Consult your Alpine dealer. Press the magazine eject
Y Although a disc is inserted, ONO DISC� is displayed and thebutton and pull out the magazine.
unit does not start to play or eject the disc.Check the indication. Insert the magazine again.
- Remove the disc by following these steps:If the magazine cannot be pulled out, consult your Alpine
1) Press the c button.dealer.
The movable display will open.Y Magazine ejection not possible.
2) Press the c button again for at least 3 seconds while the- Press the magazine eject button. If the magazine does
movable display is open.not eject, consult your Alpine dealer.
ERRORERROR - 02
Y Mechanism error.Y A disc is left inside the CD Changer.
1) Press the c button and eject the CD.- Press the Eject button to activate the eject function. When the
If not ejecting, consult your Alpine dealer.CD Changer finishes the eject function, insert an empty CD
2) When the error indication remains after ejecting, press themagazine into the CD Changer to receive the disc left inside
c button again.the CD Changer.
If the error indication still does not turn off after pressing
the c button for a few times, consult your Alpine dealer.NO MAGZINE
NOTE(CDA-7995/CDA-7894/CDA-7893)
When the OERROR� is displayed:
In case that the disc cannot be ejected by pressing the c button,NO MAGZN
press the RESET switch (refer to page 5) and press the c button(CDA-7892)
again.
If not ejecting, consult your Alpine dealer.Y No magazine is loaded into the CD Changer.
- Insert a magazine.
NO DISC
Y No indicated disc.
- Choose another disc.
33-EN |
ACEC
ALPINE
