ADDITIONAL INFORMATIONRemoving the unit
1Remove the protection collar.
Maintenance1 Detatch the front cover (page 4).
Cleaning the front panel2 Engage the release keys together with the
Wipe the surface with a soft, dry cloth. Do not useprotection collar.
liquid cleaners or aerosol cleaners.
Cleaning the connectors
The connectors need to be cleaned occasionally.
Wipe the surface of the connectors with a cotton
swab slightly moistened with alcohol.
Orient the release
Main unitkey correctly.
3 Pull out the release keys to remove the
protection collar.
Back of the front panel
Notes2Remove the unit.
YFor safety, turn off the ignition before cleaning1 Insert both release keys together until they
the connectors, and remove the key from theclick.
ignition switch.
YNever touch the connectors directly with your
fingers or with any metal device.
Face the hook
inwards.
Fuse replacement
When replacing the fuse, be sure to use one
matching the amperage rating stated on the
original fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse blows
again after replacement, there may be an internal
malfunction. In such a case, consult your nearest2 Pull the release keys to unseat the unit.
Sony dealer.
Fuse (10 A)
3 Slide the unit out of the mounting.
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as this
could damage the unit.
13 |
ACEC
AIWA
