TROUBLESHOOTINGSPECIFICATIONS
Error codeRADIO SECTION
In the following cases the corresponding error code(FM)
indication appears. Follow the suggestions below toFrequency Range: 87.5 MHz � 108 MHz
solve such problems. If the error code indication doesUsable Sensitivity: 12.7 dBf
not disappear, consult an AIWA service center.50 dB Quieting Sensitivity: 17.2 dBf
IF Rejection: 100 dB
E03Focus error. Check that the CD is loaded properlyFrequency Response: 30 Hz � 15,000 Hz
(right side up, etc.), and the CD contains validS/N Ratio: 70 dB
data.Stereo Separation: 35 dB at 1 kHz
Alternate Channel Selectivity: 90 dB
Reset buttonCapture Ratio: 3 dB
If a CD does not operate properly, press the reset button(AM)
with a pointed object such as a pencil, etc. Note that allFrequency Range: 530 kHz � 1,710 kHz
your settings will be erased if this button is pressed.Usable Sensitivity: 30 ?V (30 dB)
CD SECTION
Frequency Response: 17 Hz � 20 kHz +0/�3 dB
Dynamic Range: More than 85 dB
Channel Separation: More than 60 dB
S/N Ratio: More than 90 dB
Wow/Flutter: Unmeasurable
Reset button
AUDIO SECTION
Max. Power Output: 45 W � 4 channels
MAINTENANCE
AUX input
Cleaning the front panelInput sensitivity (load impedance) AUX: 300 mV
Wipe the surface with a soft, dry cloth. Do not use liquid(10 k&)
cleaners or aerosol cleaners.
GENERAL
Cleaning the connectorPower-Supply Voltage: 14.4 V (11 to 16 V
The connector needs to be cleaned occasionally. Wipeallowable), DC, negative ground
the surface of the connector with a cotton swab slightlyLoad Impedance: 4 &
moistened with alcohol.Tone Control:
Bass ? 10 dB at 100 Hz, Treble ? 10 dB at 10 kHz
Back of the front panelPreamp Output Voltage (load impedance): 2.2 V
(10 k&)
Installed size: 182 (W) � 53 (H) � 155 (D) mm
(7 1/4 (W) � 2 1/8 (H) � 6 1/8 (D) inches)
Supplied Accessory: Carrying case (1)
YSpecifications and external appearance are subject to
change without notice due to product improvement.
REAR PANEL
For details, refer to the separate OINSTALLATION AND
CONNECTIONS �.
ENGLISH ENGLISH 66 |