CD-DP900H/E
CC
BB
PUSH EJECT�. 2) button to se-AE
7 7 7 7 7 VVVVV
button to start play-D
0 / R0 / R0 / R0 / R0 / RA Playback headB CapstanC Pinch rollerD Erase headE Recording/Playback headIllustration:CD-DP900E
Open the cassette door by pushing the area marked OLoad a cassette into the TAPE 1 or TAPE 2 cassette compartment with the side to be played facing toward you.Press the TAPE (1 lect the cassette you want to listen to.Press the back.
TAPE 1TAPE 2
1234
TAPE 1TAPE 2
34If trouble occurson again.If the unit is not restored in the previous operation, un- plug and plug in the unit, and then turn the power on.Clearing all the memory (reset)stand-by mode.Whilst pressing down the CLOCK button and the EQUALIZER/X-BASS/DEMO button, press the ON/ STAND-BY button until OCLEAR AL� appears.MaintenanceDirty heads, capstans or pinch rollers can cause poor sound and tape jams. Clean these parts with a cotton swab moistened with commercial head/pinch roller cleaner or isopropyl alcohol.When cleaning the heads, pinch rollers, etc., unplug the unit which contains high voltages.After long use, the deckOs heads and capstans may be- come magnetised, causing poor sound. Demagenetise these parts once every 30 hours of playing/recording time by using a commercial tape head demagnetiser. Read the demagnetiserOs instructions carefully before use.Clean the dust or stain on the CD pickup lens using a com- mercial cleaning disc (brush type).
nWhen this product is subjected to strong external interference (mechanical shock, excessive static electricity, abnormal sup- ply voltage due to lightning, etc.) or if it is operated incorrectly, it may malfunction.If such a problem occurs, do the following: 1.Set the unit to the stand-by mode and turn the power2.Note: If neither operation above restores the unit, clear all the memory by resetting it.n1.Press the ON/STAND-BY button to enter the power2.Caution: This operation will erase all data stored in memory including clock, timer settings, tuner preset, and CD programme.nllll
Listening to a cassette tape (TAPE 1 or TAPE 2)
)
WWWWW
or
XXXXX
button to start play-
OPEN/CLOSE button toOPEN/CLOSE button to
7 7 7 7 7 7 7 7 7 7 0 / R 0 / R 0 / R 0 / R 0 / R Illustration:CD-DP900E
Press the ON/STAND-BY button to turn the power on.
2
Press the CD button.Press the open the disc tray.Place the CD(s) on the disc tray, la- bel side up. When loading a third disc, press the DISC SKIP button to turn the disc tray, then place the CD in the open position.Press the close the disc tray.To select the CD you want to listen to first, press the DISC SKIP button.Press the back.Press the TUNER (BAND) button re- peatedly to select the desired fre- quency band (FM or AM).Press the TUNING/TIME (button to tune in to the desired sta- tion. When the TUNING/TIME button is pressed for more than 0.5 seconds, scanning will start automatically and the tuner will stop at the first receiv- able broadcast station.
� will appear when an FM broadcast is in
jjjjj
Ostereo.
l
To receive an FM stereo transmission: Press the TUNER (BAND) button to display the OST� indicator.
12345612
Press the EQUALIZER/X-BASS/ DEMO button to cancel the demonstration mode.
2, 43, 5
1
8 cm (3")
12 cm (5")
FM stereo mode indicator
FM stereo receiving indicator
Turn on your system
12
16
44The first time the unit is plugged in, the unit will enter the demon- stration mode. You will see words scroll.Listening to a CD (CDs)Listening to the radio
� 11 � |
ACEC
SHARP
