ADVANCED OPERATIONS: USING CUE POINTS/LOOP POINTS MEMORY
7 Storing CUE points
Insert a Multimedia Card in the card insertion slot and perform the same pro-
CUE/LOOP
cedure as when the internal memory is used. P.16
MEMORY
7 Storing Loop points
CUE/LOOP
Insert a Multimedia Card in the card insertion slot and perform the same pro-
DELETE
cedure as when the internal memory is used. P.16
7 Calling stored Cue/Loop points
CUE/LOOP
Insert a Multimedia Card in the card insertion slot and perform the same pro-CALL
2, 3
cedure as when the internal memory is used. P.16
7 Deleting stored Cue/Loop points
Insert a Multimedia Card in the card insertion slot and perform the same pro-
cedure as when the internal memory is used. P.16
7 Deleting data from a specific disc
Deleting data from the memory card of a specific disc.
1. Insert the disc.
? Insert the disc from which to delete Cue/Loop points etc. from the memory
card.
2. Insert the Multimedia Card (MMC) in the card insertion
slot.
? When Cue and Loop points are stored, the calendar display and the play-Copying MMC Data (From One MMC to Another)
back address display lights in red.Use the following procedure to copy data on one MMC (CARD A) to another MMC
3. Hold down the CUE/LOOP DELETE button for 5 seconds(CARD B).
or longer.1. Remove the disc.
? [DISC DELETE? PUSH MEMORY] is displayed on the display.
2. Remove the card.
4. Press the CUE/LOOP MEMORY button.
3. Hold down the CUE/LOOP MEMORY button for 5 seconds
? With [DELETE] shown on the display, that discOs Cue/Loop points etc will
or longer.
be deleted from the memory card.
? [MMC>MMC(OVERWRITE), CARD A IN] is displayed.
? All the lights of the calendar display and the Cue/Loop display etc. of the
4. Insert the MMC to copy data from in the card insertion
playback positioning display will go out.
slot.
7 Formatting cards
? [READING] is displayed.
Formatting deletes all data on the MMC.
5. After a few minutes, [CARD B IN] is displayed. Remove
1. Removing the disc.
card A and insert the destination card (CARD B) in the
2. Insert the Multimedia Card (MMC) in the card insertioninsertion slot.
slot.? [WRITING] is displayed.
3. Hold down the CUE/LOOP DELETE button for 5 seconds6. After a few minutes [CARD A IN] is displayed.
or longer.
7. Repeat steps 4 to 6 twice for a 8M card and four times
? [FORMAT? PUSH MEMORY] is displayed.
for a 16M card to complete the copy operation.
4. Press the CUE/LOOP MEMORY button.? [COMPLETE] is displayed when copying is completed.
? [FORMAT] is displayed and all data on the card is deleted.It is impossible to copy from a card with greater capacity to the receiving
7 Data other than CUE/LOOP stored on MMCcard.
? Hot cue points A, B, C
Copying Data in the Internal Memory
Hot cue points A, B and C are automatically stored on MMC. When a disc storing
hot cue points is inserted, the [A], [B] and [C] indicators light in green. To call(Copying from internal memory onto MMC)
stored hot cue points, press the A, B or C button.This procedure copies data in internal memory to MMC.
The green flashing indicator will light steadily (when the call is made, sound will
1. Remove the disc.
be interrupted briefly). If call is not needed, press the HOT CUE REC MODE
2. Remove the card.
button. The indicator will change to red, and you can set the hot cue point. To call
3. Hold down the CUE/LOOP MEMORY button for 5 seconds
the hot cue point, remove and replace the disc or MMC and the A, B and C buttons
or longer.
will blink on and off, at this time it is possible to call.
? [MMC>MMC(OVERWRITE), CARD A IN] is displayed.
? WAVE display
4. Press the CUE/LOOP MEMORY button again.
When a wave display for one track is completed it is automatically stored on the
? [INT>MMC(OVERWRITE), CARD IN] is displayed.
MMC. When the same track is played again, the stored WAVE display is automati-
cally called. Data for items beyond track number 21 are stored on the MMC.5. Insert the destination MMC.
? [WRITING] is displayed.
? [COMPLETE] is displayed when copying is completed.
* If the [Err] message appears in one of the displays, the memory
data has not been copied properly. Turn the power to both
players OFF and then ON again, and repeat the copying proce-
dure from step 1.
* When copying from MMC to MMC, or from internal memory to
MMC, the MMC memory is overwritten; as a result, any data
previously recorded in MMC will be completely erased.
* Perform this procedure with the DIGITAL OUT mode set to "DJ".
17
<DRB1339>
En |
ACEC
PIONEER
