CD-M10000W
ENGLISH
! Aerial connection! Speaker connection
Supplied FM aerial:Main speakers:
Connect the FM aerial wire to the FM 75 OHMS Connect the black wire to the MAIN (-) terminal, and the blue wire to the MAIN (+) ter-
terminal and position the FM aerial wire in the di-minal.
rection where the strongest signal can be re-
ceived.Woofers:
Connect the black wire to the WOOFER (-) terminal, and the red wire to the
Supplied AM loop aerial:WOOFER (+) terminal.
Connect the AM loop aerial wire to the AM
LOOP socket. Position the AM loop aerial for
Caution:
optimum reception. Place the AM loop aerial on " Connect the speaker wires to the speakers first, then to the unit.
a shelf, etc., or attach it to a stand or a wall with
" Never mistake the MAIN and the WOOFER terminals. The unit or the speakers
screws (not supplied).may be damaged.
" Only the included speakers should be used with this product. Do not use other
Note:
speakers with this unit or use the supplied speakers with other units.
Placing the aerial on the unit or near the AC power lead may cause noise pickup.
" Do not mistake the right and the left channels. The right speaker is the one on the
Place the aerial away from the unit for better reception.
right side when you face the unit.
" Do not let the bare speaker wires touch each other.
Installing the AM loop aerial:
" Do not allow any objects to fall into or to be placed in the bass reflex ducts.
< Assembling >< Attaching to the wall >" Do not stand or sit on the speakers. You may be injured.
Wall Screws (not supplied)
1
External FM aerial:
- System connections -
Use an external FM aerial if you require better reception. Consult your dealer.
2
External Preparation for Use
FM aerial
IncorrectIncorrect
3
75 ohm
coaxial
cable4
5
Note:
When an external FM aerial is used, disconnect the supplied FM aerial wire.
6
7
E-10
01/10/1CD-M10000W(X)E1.fm |
ACEC
SHARP
