ENGLISH
MENU MODE
The numbers between parentheses refer to the fold-out.
Text Memory Review/Erase Text MemoryRecording submenus
All input CD-Text data is stored in the Text Memory of theThe Auto Track increment menu selection determines whether
CDR500 until the disc is finalized. If the text memory becomes
full, the message will appear in the displaythe CDR500 automatically marks tracks based on the source
and you will be unable to add more text. If you would like to add(Auto Track ON) or if all track increments are made manually
via the TRACK INCR (73) button (Auto Track OFF).
more text, you must finalize a disc that has text stored in the
Text Memory or the text for a disc can be erased by followingNote:
the procedure below.
The TRACK INCR (73) buttons will mark a track mark during
Note:both Auto Track ON and OFF recording.
The text for all unfinalized discs is accessible during the TextThe most efficient way to record from a digital source is via a digital
Memory Review mode. You do not need to insert the corre-connection that contains user data. The user data part of a digital
sponding disc to erase its text.signal provides track information to the CD recorder. User data is
11111Stay in the stop mode. (No Operation)usually found only in an SPDIF format digital connection. The
AES/EBU standard does support user data information.
22222Press STORE/MENU (12, 83) on the deck or the remoteIf Auto Track is ON and the source you are recording from is
control to enter Menu mode.
analog or digital without user data, the CDR500 will use a si-
33333Rotate REC LEVEL/SELECT (13) or press SSSSS (80), TTTTTlence gap to mark tracks. As the chart below indicates, once
(88) to select the TEXT VIEW submenu.the source signal drops below -55dB, the CDR500 will look for
appears on the display.2.7 seconds of no signal (-55dB or below). When the source
signal returns and reaches a level of -35dB, the CDR500 will
44444Press REC LEVEL/SELECT (13) or ENTER (84) to confirm.then mark a new track and continue recording.
55555Rotate RECLEVEL/SELECT (13) or press SSSSS (80), TTTTTNote:
(88) to select the disc you wish to erase.If the silence gap is less than 2.7 seconds or the dB level never
drops below -55dB, the CDR500 will probably not mark a track
and continue to record on the same track number.
Audio source signalSilence gap
A (-35 dB)
B (-55 dB)
66666Press REC LEVEL/SELECT (13) or ENTER (84) to confirm.
appears on the display.2.7 sec
B is DETECTEDA is DETECTED
Track XTrack X+1
The chart below will help identify how each source will be han-
dled by the Auto Track system.
77777Press the REC LEVEL/SELECT (13) or ENTER (84) toAUTO TRACK
confirm the erasure of the text for that particular disc.ON
Source
88888Press STORE/MENU (12, 83) to return to the submenuCD/MDTrack increment based on user data of in
or 9 9 9 9 9 (5,87) to exit.(with user data)coming signal
Note:DAT/DCCTrack increment based on user data of in
- If there are no discs in the memory, the message(with user data)coming signal
appears on the display.UnknownTrack increment after silence gap of 2.7
-/ may also appear when(no user data)seconds on incoming signal
Unfinalizing a CD-RW disc for which text was stored (see
Track increment after silence gap of 2.7
�UNFINALIZING CD-RW discsO page 15). The sameAnalogseconds on incoming signal
action(s) should be taken in order to obtain memory space.
No sourceNone
(no lock)
22
CDR500U ENG 22-272210/11/00, 9:35 AM |
ACEC
MARANTZ
