RECORDING
The numbers between parentheses refer to the fold-out.
ABCDEFGHI
123
JKLMNOPQ
456
ENGLISH
RSTUVWXYZ
789
CD RECORDER CDR631DISPLAYSPACESCROLL
0
IRREC MODETR.INCR.RANDOMREPEATFUNCTION
DELETESTORE
FINALERASECANCLMENU
RecordableReWritableCDRCD
TIME12345PROG
POWERSTANDBYHEADPHONELEVELTEXT67890INPUTu
010REC LEVEL/SELECTPUSH ENTER
MENU/CANCEL/
STOREDELETE
er yutENTER
Manual start recording
About AUTO TRACK and AUTO STOP
YAUTO TRACK is a function to increment track numbers
either manually or automatically.
AUTO TRACK ON : track numbers will be automati-Y If or flashes, the digital data is not being received
cally incremented according to
correctly. Check all connections and settings on both the
the source. (See the table on
source unit and the CDR631.
page 19.)
AUTO TRACK OFF: track numbers are manually55555 Set the optimal recording level on the CD-Recorder.
incremented by pressing TR.1. Play the source first to set the optimal recording level on
INCR. (25) or TRACK INCR. (67).the CD-Recorder.
YWhen AUTO TRACK is ON, you can also set AUTO 2. Rotate the REC LEVEL/SELCT (19) key until, on the
STOP function.Record/Play Level bar, all the blue segments light but
AUTO STOP ON : the recording will be stopped auto- the red segments do not light continuously during the
matically. (See the Table on pageloudest passages.
20.)DIGITAL RECORDING : +6dB ~ �63dB
AUTO STOP OFF: the recording has to be stoppedANALOG RECORDING: 0dB ~ �63dB
manually.3. Stop the source.
Y To record a 3-second silence at the start of a track,
Note:press 2/; (14) or ; (76) before starting the source.
AUTO STOP function is only activated when Manual start re-
66666To start recording, press 00000 (12) on the CD-Recorder and
cording (REC MANUAL mode) is used.
immediately start the source.
11111Make sure the disc is absolutely free of scratches andThe track number and recording time left appear on the display.
dust particles.Y If 9 (13, 81) was pressed within 3 seconds after 0
(12), no recording will take place.
22222Connect a cable from an external source to the CD-Re-YTo check the elapsed recording time, press TIME (7)
corder. (see INSTALLATION page 5 and 6.)or DISPLAY (71). (This can also be done during the
recording.)
33333Press INPUT (10) repeatedly until the selected external
source appears on the display (depending on the connec-77777 To stop recording, press 99999 (13, 81).
tion used):Y To pause recording, press 2/; (14) or ; (76).
�, or lights up and ,
After recording the display will show for sev-
or appears on the display.
eral seconds as it finishes recording.
Note:
The recorded sound might be distorted when you adjust the
recording level above 0dB for digital recording and -12dB for
analog recording. The default setting of record level for digital is
0dB and analog is -12dB.
44444With the recorder stopped, press REC MODE (26) threeImportant:
times to enter the Manual Record standby mode.
If you want to play the recorded CD-R disc on any regular
� .CD player, it must first be finalized. See finalizing discs on
page 12.
Finalized CD-RW discs play only on CD-RW compatible CD
players.
11
CDR631(U)_Eng_P01-11.p65118/4/00, 9:29 AM |
ACEC
MARANTZ
