INSTALLATION
Connections generalAnalogue connections CD Recorder & CD Player
For playing back on the CD Recorder and/or the CD PlayerThis connection must be established for the play-back CD
English
deck, the following output connections are available:Recorder deck and for the CD Player deck (cable 2)
- Digital coaxial output (CD & CD-R)Cable 1 is used only if you want to make recordings from an
- Analogue output (CD & CD-R)external analogue source.
We recommend that these be connected to the TAPE or CD-R
input on your amplifier.
For external recording, the following input connections are
L
available:
RLCD RECORDER
- Digital optical input OUTL
ANALOG DOUIGTITALR
- Digital coaxial input INROUT
ANALOG
- Analogue input1DIGITALINOUT
IN
OPTICAL
2
For playing back on the CD Recorder and CD Player decks
separately (DUAL mode), the following output connections
are available:
L
LRECEIVER
- Digital coaxial output (CD)R
R
OUT
- Analogue output (CD)TAPEIN
We recommend that these be connected to the CD input on
your amplifier.
The connections to be made depend upon the possibilities
your audio equipment offers. Please refer to the user manuals
for your other audio equipment first.Use the audio cables supplied. Connect the red plugs to the
R sockets, and the white plugs to the L sockets.
Digital recordings, either optical or coaxial, will give the best
performance in terms of audio and versatility (e.g. auto-track).1 For recording from an external source, connect Cable 1 to
(The digital optical connection is less sensitive to externalthe ANALOGUE IN plug on the CD Recorder/Player and the
disturbances).LINE-OUT or TAPE-OUT plug on an amplifier.
If your equipment does not allow for digital connections,
the high quality Analogue/Digital Converter on the CDNote: For recording directly from a CD player the analogue
Recorder/Player will ensure excellent audio performanceinput of the CD Recorder/Player should be connected
when recordings are made from an analogue source.to the analogue output of the CD player.
Playback via the digital coaxial output of the CD2 For playing back, connect Cable 2 to the ANALOGUE OUT
Recorder/Player gives the best audio performance.plugs on the CD Recorder/Player and the INPUT plugs on an
If your equipment does not offer digital connections the highamplifier, e.g. TAPE IN, CD-R or AUX.
quality Digital-Analog-Convertor of the CD Recorder/Player
ensures a high sound quality via the analogue output.Note: Never use the PHONO input.
We recommend that both digital and analogue connections
be made, so that analogue recordings can be made when
digital recording is not possible.
The most common ways of connecting the CD Recorder/Player
are explained below. If you still have difficulties with the
connections, feel free to contact the Philips Consumer Service
desk in your country.
9 |
ACEC
PHILIPS
