xp CDR 820/17 eng. 30-08-2001 10:43 Pagina 20
About recording
Basic informationAuto Level Control (ALC)English
We will describe:
Auto Level Control ensures that the tracks on the recorded
� Recording from internal CD changerdisc have a similar volume level.Always the already recorded
� Recording from an external sourcetracks of the CDR(W) disc will be taken as reference for
� Finalizing CDR(W) discs:the volume level of the following recordings.
Finalizing a CDR(W) disc is a simple procedure, necessary
to:Auto level control becomes automatically active,
� play a recorded CDR on a standard CD player;when:
� play a recorded CDRW on a CDRW compatible CD� COMPILE CD is being used,
player� a disc, a track or a track edit is being high speed recorded
� UnŢnalizing CDRWdiscs:and the CDR(W) has recordings on it, or
Necessary to add new recordings to the disc or to erase the� a program (consisting from more than one disc) from the
discCD changer is being high speed recorded.
� Erasing from CDRWdiscs
Auto level control will not become active, when:
0The recording procedure is the same for CDR and CDRW� using COPY CD,
discs. Make sure that the CDR(W) is absolutely free of� making recordings from an external source, or
scratches and dust particles.� making normal recordings in listen mode.
0It is advisable to use a CDRW disc for your Ţrst try.Switching ALC permanently off
0For recordings, the minimum track length is 4 seconds.You1 If necessary press STOP 9 to stop playback.
can record up to a maximum of 99 tracks on a disc.The2 Press CDR to select the CD recorder.
minimum of recording time left on the disc is 7 seconds.
Else, Disc Full is displayed and you cannot enter into the3 Press REC LEVEL to select:
record mode. If the length of the source material is longer� ALC Off:ALC is permanently switched off.
than the remaining recording time on the CDR(W) Does0To enable ALC press REC LEVEL again to select:
Not Fit is displayed
� ALC On:ALC is enabled.
0CD TEXT on the original CD is recorded automatically.
When a track with copy protected text is encountered
Text Protect will be displayed.Adjusting the record level
Copyright protection
The Serial Copy Management System (SCMS) prevents the
making of a digital copy from a digital copy.The system allows
making a digital recording from the original, however in some
countries this may require the authorization of copyright
holders.
When you try to record a copy protected material from an
external source, Copy Protect will be displayed. No further
digital recording is possible then.
You can adjust the reference record level for both digital
When you try to record a copy protected material from theand analog recordings from the internal changer as well as
internal CD changer no digital recording is possible, howeverfrom external sources.This is also possible when ALC is
the CD recorder will automatically switch to analog recording.active.This feature can also be used for fading your
It is not possible to copy an MP3-CD.recordings in or out.
Remarks on recording
0Recording can be stopped manually by pressing STOP 91 Select the recording source with CD1, CD2 or CD3 for
otherwise recording will stop automatically.internal recording or with AUX for external recording.
2 Press REC LEVEL on the set to enable the
0During recording the elapsed recording time can be checked! EASY JOG " control to adjust the record level.
by pressing DISPLAY.
3 Rotate the ! EASY JOG " control to the left to adjust the
desired record level.
� The actual record level (in dB) will be displayed.
Direct Line Recording (DLR)
The CD recorder is equipped with the high-performanceNotes:
Direct Line Recording (DLR) technique. It ensures a perfectThe record level from the internal changer can only be
recording of the source material, meaning a true Obit for bit�adjusted during recording.
recording. DLR will not be active, when ALC is used or whenThe loudest sounds on the source should not reach 0 dB
the record level is adjusted.maximum (Å¢rst red level).
20 |
ACEC
PHILIPS
