7Insert a recordable MD or tape.
Timer recording radio
If you use a partially recorded MD,
recording starts after the recorded tracks.
programmes
If you use a tape, recording starts from the
top side. Insert a tape with the side you want
To timer record, you must first preset the radio
station (see Presetting radio stations on pageto record on facing up.
34) and set the clock (see Setting the time on8Press ?/1 to turn off the system.
page 8).
1Tune in the preset radio station (seeToDo this
Listening to the radio on page 35).
Check the settingPress CLOCK/TIMER
SELECT on the remote and
2Press CLOCK/TIMER SET on the
turn ./> (or press
remote.
. or > on the remote)
DAILY SET ? appears.to select either MD REC or
3Turn ./> (or press . or > onTAPE REC, then press
ENTER/YES.
the remote) to select either MD REC
SET ? or TAPE REC SET ?, thenChange the settingStart over from step 1.
press ENTER/YES.Cancel the timerPress CLOCK/TIMER
ON appears and the hour indicationSELECT on the remote and
turn ./> (or press
flashes.
. or > on the remote)
4Set the time to start recording.to select TIMER OFF, then
press ENTER/YES.
Turn ./> (or press . or > on
the remote) to set the hour, then press
ENTER/YES.Tip
The minute indication flashes.When you record from the radio, the station name
(see Labelling the preset stations on page 36, orTimerTurn ./> (or press . or > on
frequency when the station is not labelled), the start
the remote) to set the minute, then press
time and the stop time are automatically recorded on
ENTER/YES.the MD.
5Set the time to stop recording followingNotes
the procedure in step 4.Y The Smart Space and Level Synchro Recording
functions do not operate.
6When you record onto an MD, selectY Do not operate the system from the time the system
STEREO or MONO by turning ./>turns on until the recording starts (about 30 seconds
(or pressing . or > on the remote)before the preset time).
then press ENTER/YES.Y When you record on a brand new MD, the first
The timer recording settings appear, then15 seconds are not recorded.
Y If the system is on about 30 seconds before the
the original display returns.
preset time, the timer-recording will not be
activated.
Y The volume is reduced to minimum during
recording.
43 |
ACEC
SONY
