LIPS Board Block Diagram
12V
50 ~ 60Hz
5V
100KHz
EMIINPUT RECTIFIERHVDCENERGYOUTPUT RECTIFIER
COMPONENTSAND FILTERTRANSFERAND FILTER
LINEGND
100 ~ 240V
SIGNAL
PWM CONTROLPHOTO -COUPLERCOLLECT-
CIRCUITISOLATIONON
PRIMARYSECONDARY
12V
INVERTER CIRCUITHigh Voltage output
Operation description_LIPS
1. EMI components.
This part contains of EMI components to comply with global marketing EMI standards like FCC, VCCI CISPR, the
circuit included a line-filter, across line capacitor and of course the primary protection fuse.
2. Input rectifier and filter.
This part function is for transfer the input AC voltage to a DC voltage through a bridge rectifier and a bulk capacitor.
3. Energy Transfer.
This part function is transfer the primary energy to secondary through a power transformer.
4. Output rectifier and filter.
This part function is to make a pulse width modulation control and to provide the driver signal to power switch, to
adjust the duty cycle during different AC input and output loading condition to achive the dc output stablize, and also
the over power protection is also monitor by this part.
5. Photo-Coupler isolation.
This part function is to feed back the dc output changing status through a photo transistor to primary controller to
achieve the stabilized dc output voltage.
6. Signal collection.
This part function is to collect the any change from the dc output and feed back to the primary through photo tran-
sistor.
- 9 - |
ACEC
LG-GOLDSTAR
