ASSEMBLY
BEFORE YOU START TO ASSEMBLE THE GRASS CATCHER
Some tractor models may need minor modifications before you can mount the grass catcher to the tractor.
Look carefully at the drawbar on your tractor and compare to the illustrations below. If your drawbar looks
like STYLE "A" (has the upper corner ribs), your tractor is ready - proceed with the grass catcher assembly.
If your drawbar looks like STYLE "B" (does not have the upper corner ribs), go to the PREPARATION
section in this manual.
UPPER
CORNER
RIBS
TRACTOR DRAWBARTRACTOR DRAWBAR
STYLE "A"STYLE "B"
PARTS IDENTIFICATION
UPPER CHUTE
COVERDUMP
BAG
INDICATOR
.Containetainerhenr is
erlyisntlylacenstalled. Rmeneplace wt con.
nless conn. Ctainecomher is propmenagde frequed repck b
WARNINGDsuo nocrackebject to wt operate md or damear anowaged ded. Uer utieriose only a reratioCHUTE LATCH
nstalledmenpla.Cont coce wtainentainerhenr is.
tainer is proag freperlyisd repquentlylace. Re
. Cmendeheck b
WDsuo nocrackebjeARNINGt oct to wperate md or daear anagowmd deer unless coned. Utierioration recomse only a
.Contain wer ishenr.
roperlyised replacementlynsta. Rlledeeplacent containeLOWER CHUTE
WDsubo nARNINGcraject toot operatecked o wr dear aam mndgeower una dd. Uetierioraseless co ontioly a recomn. Cntainerheck ba is pendmg frequ
LOWER CHUTE
GRASSATTACHING
CATCHERSTRAPS
CONTAINERS
NOTE: When right hand (R.H.) and left hand (L.H.) are mentioned in this manual, it means when you are seated on the tractor,
in the operator's position.
(1) 3/8" Wrench(1) Drive Ratchet
THESE ARE THE TOOLS YOU WILL NEED TO(1) 1/2" Wrench(1) 3" or longer Extension
ASSEMBLE YOUR GRASS CATCHER:(2) 9/16" Wrenches(1) Short Handle
(1) 1/2" Socket Phillips Screwdriver
CAUTION: BEFORE ASSEMBLING GRASS CATCHER TO TRACTOR:
Depress clutch/brake pedal fully and set parking brake.
Place gearshift/motion control lever in "NEUTRAL" position.
Place attachment clutch in "DISENGAGED" position.
Turn ignition key "OFF" and remove key.
Make sure the blade and all moving parts have completely stopped.
Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with
plug.
6 |