SelectTo
Adjusting the convergence Adjusting the picture quality Adjusting the color of the picture
degauss the monitor. To degauss the monitor
(CONVERGENCE)(SCREEN)DEGAUSS(COLOR)manually, select OK.
The CONVERGENCE settings allow you to adjust the quality of The SCREEN settings allow you to degauss (demagnetize) the CANCEL adjust the degree of moire cancellation until The COLOR settings allow you to adjust the pictureOs color
the picture by controlling the convergence. The convergence monitor manually and adjust the picture quality by controlling the MOIREthe moire* is at a minimumtemperature by changing the color level of the white color field.
refers to the alignment of the red, green, and blue color signals.moire and landing. reduce any color irregularities in the screenOs Colors appear reddish if the temperature is low, and bluish if the
If you see red or blue shadows around letters or lines, adjust the Y If the color is not uniform or picture is fuzzy, degauss the top left corner to a minimumtemperature is high. This adjustment is useful for matching the LANDING**
convergence.monitor (DEGAUSS).monitorOs color to a printed pictureOs colors.
These settings are stored in memory for all input signals.Y If elliptical or wavy patterns appear on the screen, cancel the reduce any color irregularities in the screenOs You can set the color temperature for each of the video input
moire (CANCEL MOIRE).LANDING **top right corner to a minimumconnectors.
1Press the MENU button.Y If the color is irregular at the corners of the screen, adjust the reduce any color irregularities in the screenOs
The menu appears on the screen.landing (LANDING) (CPD-G520 only).LANDING**bottom left corner to a minimum
The monitor is automatically demagnetized (degaussed) when the xSelect the COLOR mode
2Move the control button up or down to highlight power is turned on. There are 4 types of adjustment modes, EASY, PRESET, reduce any color irregularities in the screenOs
CONVERGENCE and press the control button.The screen is degaussed for about 2 seconds. If a second degauss EXPERT, and sRGB. The default setting is EASY which can be LANDING**bottom right corner to a minimum
The CONVERGENCE menu appears on the screen.cycle is needed, allow a minimum interval of 20 minutes for the 0 reset all the SCREEN adjustments to the adjustable from 5000K to 11000K.
best result.RESET **factory setting levels. Select OK. If you want to set another mode (other than EASY), select the
3Move the control button up or down to select the desired mode in the OPTION ( ) menu. Then adjust the
desired adjustment item. Then press the control The CANCEL MOIRE setting is stored in memory for the current * Moire is a type of natural interference which produces soft, wavy lines
on your screen. It may appear due to interference between the pattern selected mode in each COLOR ( ) menu.
button.input signal. All other settings are stored in memory for all input of the picture on the screen and the phosphor pitch pattern of the
The adjustment bar appears on the screen.signals.
monitor.
** The LANDING and RESET functions are for CPD-G520 only.1Press the MENU button.
4Move the control button up or down to make the 1Press the MENU button.
The menu appears on the screen.
adjustment. Then press the control button.The menu appears on the screen.Example of moire
2Move the control button up or down to highlight
SelectTo2Move the control button up or down to highlight OPTION and press the control button.
SCREEN and press the control button.US
1-6 The SCREEN menu appears on the screen.horizontally shift red or blue shadowsThe OPTION menu appears on the screen.
vertically shift red or blue shadows12OK3Move the control button up or down to highlight INPUTPICTURE EFFECTMENU
3Move the control button up or down to select the
COLOR MODE. Then press the control button.
Tvertically shift red or blue shadows at the top of desired adjustment item. Then press the control
TOPthe screenbutton.Note
The picture may become fuzzy when the CANCEL MOIRE function is 4Move the control button up or down to select the
vertically shift red or blue shadows at the bottom The adjustment bar appears on the screen. Bactivated.COLOR mode.
BOTTOMof the screen
4Move the control button up or down to make the OPT ION
0 reset all the CONVERGENCE adjustments to adjustment. Then press the control button.
RESETthe factory setting levels. Select OK.COLOR MODE
PRESET
For more information about using the RESET mode, see EASYEXPERT
OResetting the adjustments (RESET)� on page 18.sRGB
EXIT:MENU
(continued)
1415 |
ACEC
SONY
