CLEANING THE GRILL AND OVEN2. Loosen the two screws using a Pozidrive
screwdriver.
FURNITURE
All removable parts, except the grill pan handle can
be washed in the dishwasher.
The grill pan may be cleaned using a soap
impregnated steel wool pad. The grill pan grid and
oven shelves should be cleaned using hot soapy
water. Soaking first in soapy water will make cleaning
easier.
CLEANING INSIDE THE OVEN/GRILL
3. Hold the door glass securely in place with one
COMPARTMENTShand before removing the screws completely with
The vitreous enamel coating in the fan oven / topthe other hand.
oven and grill compartment can be cleaned using4. Using both hands, gently tilt the top of the door
normal oven cleaners or aerosol oven cleaners withglass towards you, lift slightly to disengage the
care. Ensure that the manufacturers instructions arelocators from the two bottom brackets.
followed and that all parts are well rinsed afterwards.
5. Clean the outer and inner glass using hot soapy
water or Hob Brite cleaner may be used with
CARE OF STAYCLEAN SURFACEScare. DO NOT use Hob Brite on the Stainless
Steel or painted finishes. DO NOT try to clean
The back panel of the fan oven is coated with a
Stayclean finish. This should not be cleanedthe foil which is inside the door. The foil is there
manually.to help keep the door cool, if it is damaged it will
not work. Ensure that all parts are well rinsed
Aerosol cleaners must not be used on Staycleanand thoroughly dried before attempting to replace
surfaces and must not come into contact with
the outer door.
elements or the door seal, as this may cause
damage.TO REPLACE THE OUTER GLASS
During normal use the Stayclean coating will become1. Holding the oven glass with both hands, gently
splashed with fats and food residues. By running theplace the locators into the holes of the brackets
oven without food, the Stayclean surfaces burn offat the bottom of the oven door.
any soilage.
2. Push the top of the oven glass towards the oven
door, ensuring the screw location holes line up.
CLEANING THE DOOR GLASS3. Hold the glass in place with one hand and insert
the cross head screws into the location holes
with the other hand. Give the screws one turn to
To prevent damaging or weakening of theensure the glass is secure.
door glass panels avoid the use of the
4. Tighten the screws positively with a Pozidrive
following:screwdriver before closing the oven door.
Household detergents and bleachesDo not attempt to use the oven without the
glass being in place.
Impregnated pads unsuitable for non-
stick saucepans
Brillo/Ajax pads or steel wool pads
If the door glass panel becomes chipped or
Chemical oven pads or aerosolshas deep scratches the glass will be
Rust removersweakened and must be replaced to prevent
the possibility of the panel shattering.
Bath/Sink stain removers
Please contact your local Service Force
Centre who will be pleased to advise
further.
CLEANING BETWEEN THE OUTER AND
INNER DOOR GLASS
TO CLEAN THE INNER GLASS DOOR
The outer door glass is removable for cleaning.PANELS
TO REMOVE THE OUTER GLASSClean the inner glass door panels using a soft cloth
and hot water to which a little washing up liquid has
1. Open the oven door slightly to gain access to thebeen added. If the inner panel is heavily soiled, Hob
two cross head screws on the top of the ovenBrite may be used. Do not use abrasive cleaning
door.materials on the door glass. Ensure that all parts are
well rinsed and thoroughly dried before attempting to
replace the glass.
23 |