Reverse Doors (optional)Replace Doors and Hinges
IMPORTANT: If you want to reverse your doors so that they open NOTE: Graphic may be reversed if door swing is reversed.
in the opposite direction, follow these steps. If you are not 1. Replace the parts for the bottom hinge as shown and tighten
reversing the doors, see ?Replace Doors and Hinges.?screws. See Bottom Hinge graphic. Replace the refrigerator
door.
NOTE: Provide additional support for the doors while the
hinges are being moved. Do not depend on the door magnets
Door Stop ScrewDoor Hinge Hole Plugto hold the doors in place while you are working.
2. Assemble the parts for the center hinge as shown and tighten
all screws. See Center Hinge graphic. Replace the freezer
Door Handle Sealing ScrewCabinet Hinge Hole Plugdoor.
3. Assemble the parts of the top hinge as shown in the Top
Hinge graphic. Do not tighten the screws completely.
Flat-Head Handle ScrewDoor Handle Screw Cover4. Line up the doors so that the bottom of the freezer door aligns
evenly with the top of the refrigerator door. Tighten all screws.
Final StepsDoor Handle Seal Screw Front Round-Head Handle Screw
1. Check all the holes to make sure that hole plugs and screws
Cabinetare in place. Reinstall the top hinge cover as shown in the Top
1. Remove uD??" hex-head hinge screws from the handle side and Hinge graphic.
move them to the opposite side. See Graphic 1-1.2. Replace the base grille. See Base Grille graphic.
2. Remove the cabinet hinge hole plugs from the cabinet top and
move them to the opposite side hinge holes as shown in
Graphic 1-2.WARNING
Freezer door
1. Remove freezer handle assembly as shown. Keep all parts
together. See Graphic 2.
2. Remove the door hinge hole plug. Move it to the opposite side
as shown in Graphic 3.
3. Remove the door handle sealing screws. Move them to the
opposite side of the freezer door as shown in Graphic 4.Electrical Shock Hazard
4. Remove the door stop. Move it to the opposite side of the
freezer door as shown in Graphic 5. Plug into a grounded 3 prong outlet.
5. Position the freezer handle on opposite side of freezer door. Do not remove ground prong.
Assemble handles on the door as shown in Graphic 2.
Do not use an adapter.
6. Tighten all screws. Set aside the door until the hinges and
refrigerator compartment door are in place.Do not use an extension cord.
Refrigerator door
Failure to follow these instructions can result in death,
1. Remove refrigerator handle bottom trim. For Style 1, remove fire, or electrical shock.
the handle screw cover. See Graphic 6-1. For Style 2, slide
trim down as shown in Graphic 6-2.
2. Remove the refrigerator handle assembly as shown. Keep all 3. Plug into a grounded 3 prong outlet.
parts together. See Graphic 6-3.
4. Return all removable door parts to doors and food to
3. Remove the door hinge hole plug from refrigerator door. Move refrigerator.
it to the opposite side hinge hole as shown in Graphic 3.
4. Remove the door handle sealing screws. Move them to the
opposite side of the refrigerator door as shown in Graphic 4.
5. Remove the door handle seal screw front. Move it to the
opposite side of the refrigerator door as shown in Graphic 7.
6. Remove the door stop. Move it to the opposite side of the
refrigerator door as shown in Graphic 5.
7. Position the refrigerator handle on opposite side of the
refrigerator door as shown in Graphic 6-3. Drive the two top
screws in the handle first. Align the lower portion of the handle
and drive the bottom screw.
8. Align refrigerator bottom trim. For Style 1, replace the door
handle screw cover. See Graphic 6-1. For Style 2, slide trim
into place. See Graphic 6-2.
9. Tighten all screws. Set aside refrigerator door until bottom
hinge is installed on the refrigerator.
6 |
ACEC
WHIRLPOOL
