YYou cannot adjust the surround speaker level for LS and RSDelay time adjustmentDynamic range adjustment
channels separately. To do that, see "To adjust the speaker
Sounds from the surround speakers or the center speaker areIn Dolby Digital, dynamic range between soft and loud sounds
level without the test signal".reproduced a split second after the front speakers for the effectcan be adjusted to suit your desired playback volume.
Low-frequency effect level adjustmentof "depth".
1Play the Dolby Digital sound.
Dolby Digital has a discrete channel for LFE (low-frequency1Play the Dolby Surround sound.
effects), which reproduces sounds such as explosions and2Hold down a until "MIDNIGHT THEATER"
rumbles in movie soundtracks with astonishing realism.En2Press NORMAL, PHANTOM or 3 STEREO toappears on the display.
select the mode for the speaker configuration.
1Play the Dolby Digital sound.On the remote control, press SURROUND repeatedly.3Press f or g to select one of the dynamic
range modes.
2Hold down T-BASS on the remote control until3Press MANUAL SELECT repeatedly on the remote- MIN: Minimum dynamic range compression. Enjoy the
"LFE" is displayed.control to select delay time to adjust.full dynamic range of the sound track as experienced in
- C _MS: Delay time setting for center speakera movie theater.
3Press f or g repeatedly to adjust the LFE- S _MS: Delay time setting for surround speakers- STD: Standard dynamic range compression
level.
recommended by the software producers when playing
Adjust between OFF and -20 dB to 0 dB (maximum effect)4Press f or g to adjust the delay time.back at home. Default.
in 5 dB steps. The default is "LFE 0".- For center speaker: Adjust the delay time so that screen
- MAX: Maximum dynamic range compression. Keeps
YLFE is not available for Dolby Pro Logic.dialogs are heard clearly and naturally.soft sounds and dialogs intelligible even with the overall
Adjust between 0 ms (milliseconds) and 5 ms in 1 ms
volume turned down. Select this mode when you have
steps. The default is "C 0MS" (no delay).to keep the volume low, for example, when playing back
- For surround speakers:
late at night.
Dolby Digital: Adjust between 0 and 15 ms in 5 ms steps.
The default is "S 5MS".YDynamic range adjustment is not available for Dolby Pro
Logic.
Dolby Pro Logic: Adjust between 15 and 30 ms in 5 ms
steps. The default is "S 20MS".
YAdjustment of the delay time setting in Dolby Digital affects
that of Dolby Pro Logic, and vice versa. Surround speaker
delay time in Dolby Digital of 0 ms, 5 ms, 10 ms and 15 ms,
corresponds to 15 ms, 20 ms, 25 ms and 30 ms in Dolby
Pro Logic, respectively.
YDelay time adjustment is available only for speakers that
are activated.
19 |
ACEC
AIWA
