Major settingsMessages
The following examples describe settings when the D-03 isO- - -O appears on the right side of the display.
used with the P-01, P-03 and G-0s.An incompatible signal is input.
Do not input signals other than PCM or DSD.
Connection using i.LINK cablesCheck digital device connections.
Setting of the P-01
XLR, XLR2, DUAL, RCA1, RCA2, OPT or i.LINK flashes.
Output buttonIEEE 1394
The unit cannot detect a digital signal. Press the INPUT button
WORD buttonINto select a terminal to which a digital device is connected.
(When the G-0s is connected, ORb IN�)Turn on the connected device. Confirm the settings of the
UP CONVERT button176.4/192connected device.
LOOP ERR!
Setting of the P-03
The i.LINK connection has been connected to form a loop.
Digital Output settingi.LINK
WORD buttonON
NO WORD!
No WORD clock signal is being input.
Setting of the D-03
UNKNOWN
INPUT buttoni.LINK
The device connected via i.LINK is not known.
WORD buttonOne of the D-03 that outputs word
synchronization signals: OOUT�
WORD ERROR!
The others: OIN�
The frequency of the input source does not match word
When the G-0s is connected, set all
frequency. Select 44.1, 88.2 or 176.4 kHz during Super Audio
the D-03s to OIN�.CD playback.
W_OUT setting176.4 or 88.2
CH_SEL settingrespective channelsWRD LCKING
Indicates that the input WORD clock signal is locked.
Setting of the G-0s
WRD UNLCK!
Frequency change button (A, B or C) 176.4 kHz or 88.2 kHz
Indicates that the device cannot lock to the input WORD clock
FREQUENCY MODE button44.1kHz
signal. Confirm the frequency setting of the connected clock
generator. Connect a clock generator whose frequency range
with a precision greater than ?5 ppm.
Connection using XLR digital cables
Setting of the P-01The L and R channel icons flash.
Output buttonXLR DUALIndicates that L and R have been reversed in a connection to a
WORD buttonINDual AES compatible device. Correct the XLR cable
(When the G-0s is connected, ORb IN�)connection.
UP CONVERT button176.4/192
< Normally, the display shows the current input or the device
Setting of the P-03name of connected devices while the right side shows the
Digital Output settingDUALsampling frequency of input digital signal during CD playback
WORD buttonONor ODSD� during Super Audio CD playback.
UP CONVERT button176.4 or DSD
< OF� appears to the right of the Fs (frequency) indication when
the i.LINK flow rate control is operating.
Setting of the D-03
INPUT buttonDUAL
WORD buttonOne of the D-03 that outputs word
synchronization signals: OOUT�
The others: OIN�
When the G-0s is connected, set all
the D-03s to OIN�.
W_OUT setting176.4 or 88.2
CH_SEL settingrespective channels
Setting of the G-0s
Frequency change button (A, B or C) 176.4 kHz or 88.2 kHz
FREQUENCY MODE button44.1kHz
14 |
ACEC
TEAC
