Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 3 ohm loads, both channels driven, from 150 � 10,000 Hz; rated
75 watts per channel minimum RMS power, with no more than 1 %
total harmonic distortion from 250 milliwatts to rated output.
Amplifier section
Stereo mode100 W + 100 W (3 ohms at 1 kHz, THD 10 %)
Surround modeFront: 100 W + 100 W
Center*: 100 W
Rear*: 100 W + 100 W (3 ohms at 1 kHz, THD 10 %)
Subwoofer*: 100 W (3 ohms at 100 Hz, THD 10 %)
* Depending on the sound field settings and the source, there may be no sound output.
Inputs (Analog)VIDEO 1, 2:
Sensitivity: 150 mV
Impedance: 50 kilohms
Inputs (Digital)VIDEO 2 (optical):
Sensitivity: �
Outputs (Analog)VIDEO 1 (AUDIO OUT):
Voltage: 2 V
Impedance: 1 kilohms
PHONES:
Accepts low- and high-impedance headphones
Super Audio CD/DVD system
LaserSemiconductor laser
(Super Audio CD/DlVD: = 650 nm)
(CD: l = 780 nm)
Additional Information
Emission duration: continuous
Signal format systemNTSC
Frequency response (at 2 CH STEREO mode)
DVD (PCM): 2 Hz to 22 kHz (?1.0 dB)
CD: 2 Hz to 20 kHz (?1.0 dB)
Signal-to-noise ratioMore than 80 dB (VIDEO 1 (AUDIO) connectors only)
Harmonic distortionLess than 0.03 %
FM tuner section
SystemPLL quartz-locked digital synthesizer system
Tuning range87.5 � 108.0 MHz (100 kHz step)
AntennaFM wire antenna
Antenna terminals75 ohms, unbalanced
Intermediate frequency10.7 MHz
continued
US
81 |
ACEC
SONY
