Trouble check
Others
SymptomCause and/or corrective actions
While editing using the DV connectingY Remove the DV connecting cable, and connect it
cable, recording picture cannot beagain.
monitored.
The camcorder becomes warm.Y If the power of the cammcorder is on for a long time,
it becomes warm, which is not malfunction.
The supplied Remote Commander doesY COMMANDER is set to OFF in the menu system.
not work.m Set it to ON. (p. 34)
Y Something is blocking the infrared rays.
m Remove the obstacle.
Y The battery is not inserted with the correct polarity.
m Insert the battery with the correct polarity. (p. 118)
Y The batteries are dead.
m Insert new ones. (p. 118)
The BATT CHARGE lamp flashes afterY The camcorder is not malfunctioning.
you charge the battery pack installed in
the camcorder.
No function works though the power isY Disconnect the connection plug on the battery pack or
on.on the AC power adaptor, then reconnect it after
about 1 minute. Turn the power on. If the functions
still do not work, press the RESET button at the lower
right from the START/STOP MODE switch using a
sharp-pointed object. (If you press the RESET button,
all the settings including the date and time return to
the default.) (p. 116)
AC power adaptor
SymptomCorrective actions
The VTR/CAMERA or CHARGE lampY Disconnect the power cord. After about 1 minute,
does not light.reconnect the power cord. (p. 8)
The CHARGE lamp flashes.Y See the chart on the next page.
102 |
ACEC
SONY
