DCR-TRV240/TRV340
11. Steady Shot CheckRadarWRadarWRadarW
Precautions on the Parts Replacement
There are two types of repair parts.
Type A: ENC03JA
Type B: ENC03JB
Replace the broken sensor with a same type sensor. If replace with
other type parts, the image will vibrate up and down or left and
right during hand-shake correction operations. After replacing, re-
adjust according to the adjusting method after replacement.
Precautions on Angular Velocity Sensor
The sensor incorporates a precision oscillator. Handle it with care
as if it dropped, the balance of the oscillator will be disrupted and
operations will not be performed properly.
SubjectArbitrary
Measurement PointDisplay data of page 1 (Note1)
Measuring Instrument Adjustment remote commander
Specified Value2B00 to 4B00
Note1: Displayed data of the adjustment remote commander.
1 : XX : XX
Display data
Note2: The data of page: 0, address: 10 must be O00�.
Switch setting:
1) STEADY SHOT (Menu display) ...................................... ON
2) ZOOM .................................................................... TELE end
Adjusting method:
Order Page Address DataProcedure
Pitch sensor check
(SI-032 board SE301)
100311Set the data.
21Check that the display data
(Note1) satisfies the specified
value.
Yaw sensor check
(SI-032 board SE302)
300312Set the data.
41Check that the display data
(Note1) satisfies the specified
value.
Processing after Completing Adjustments
Order Page Address DataProcedure
100300Set the data.
2Move the camcorder, and check
that the steady shot operations
have been performed normally.
5-26 |
ACEC
SONY
