DCR-TRV40/TRV40E/TRV50/TRV50E
2-2. EVF SECTION (LB-078 BOARD)
1 Raise the EVF in the
direction of the arrow A
and slide it in the direction
of the arrow B.
BA
2 Two tapping screws
(M1.7 � 6)
Caution
When separating the 7 LB-078 board and
Lamp guide from the 6 VF lens assembly
by removing the three 5 claws, do not face
the side of the VF lens assembly on which
the LB-078 board is installed, downwards.
Because the Illuminator and others may fall
out of the VF lens assembly, hold the
illuminator and others using tape or paper
as shown to prevent them from falling. 4 VF cabinet (upper)
Be careful on this point especially when assembly
removing the LB-078 board and Lamp guide
because the three claws located in the VF 3Two claws
lens assembly are easy to break.
Illuminator
6 VF lens assembly
5 Three claws
Prism sheet
Hold the illuminator
and others using
tape or paper as
7 LB-078 board, Lamp guide
shown to prevent
them from falling.
9 Lamp guide
8 Two claws
q; LB-078 board
2-4 |
ACEC
SONY
