Door reversibility
1. Unplug the appliance from the power supply
before carrying out the below-mentioned
operations.
D
2. Remove the bottom hinge (1).and feets (2+3)
3. Remove the bottom door and unscrew the middle
hinge.
4. Remove the upper door by releasing it from the
top hinge pin (D).D590
5. Remove the pin (D) from the top hinge , then
mount these on the opposite side, after having
removed the plugs (I) which must be refitted on
the other side.
H
6. Replace the upper door.
7. Refit the middlehinge on the opposite side.and
replace the bottm door.
8. Screw down the bottom hinge (1) and feets (2+3)
on the opposite side by using the screws
previously removed.
PR24
Warning:
After having reversed the opening direction of
the doors check that all the screws are properly
tightened and that the magnetic seal adheres to
the cabinet. If the ambient temperature is cold
(i.e. in Winter), the gasket may not fit perfectly to3
the cabinet. In that case, wait for the natural
fitting of the gasket or accelerate this process by
heating up the part involved with a normal1
hairdrier.
2
D715
I
I
I
18 |
ACEC
ZANKER
