(Other models)
To listen to the sound of theRecording audio from a
connected MD deck:
connected component
Press MD (VIDEO) (or FUNCTION on the
remote repeatedly until OMD (VIDEO)�
appears).1Connect the audio cords.
See OHooking up optional components� on
Start playing the connected component.
page 57.
To listen to the sound of the
connected VCR:2Start recording manually.
Hold down MD (VIDEO) and press ?/1See ORecording to a tape� on page 45.
while the power is on. Release ?/1 first,
then release MD (VIDEO). This switches
the function from MD to VIDEO. Once youRecording on a connected
switched to the VIDEO function, just press
MD (VIDEO).component
Start playing the connected component.
Note1Connect the audio cords for analog
If the sound is distorted or too loud when VIDEOrecording, or connect the digital optical
function is selected, or you want to switch back tocable for digital recording.
MD function, repeat the operation described above to
switch to MD function.2Press EFFECT repeatedly to selectOptional Components
OEFFECT OFF�.
3Press 2.1CH/MULTI on the remote
repeatedly to select O2.1CH�.
4Start recording.
Refer to the operating instructions provided
with connected component.
Notes
YDigital signals are output from OPTICAL DVD
DIGITAL OUT jack during DVD function only.
Besides, the sound output from the OPTICAL DVD
DIGITAL OUT jack is not affected by the sound
adjustment. Digital signals from Super Audio CDs
are not output from OPTICAL DVD DIGITAL
OUT (DHC-FL7D only).
YThis unit is not compatible with 96 kHz sampling
frequencies and Super Audio CD format.
YWhile recording, do not change the 2.1CH/MULTI
setting.
GB
59 |
ACEC
SONY
