Troubleshooting (continued)MD Deck
An partially inserted MD cannot be pulled
A code made up of three letters andout.
message flash alternately.YThe MD deckOs self-lock system has
YThe Self-Diagnostic function is working.gripped the MD. Insert the MD
Solve the problem referring to the checkcompletely, then press MD 6.
list (page 65).
An MD cannot be inserted.
YInsert the MD with the label side up in
the direction of the arrow.
SpeakersThe controls do not work.
YThe MD is dirty or scratched. (ODisc
Sound comes from one channel or the leftError� appears.) Replace the MD with a
and right volume are unbalanced.new one.
YCheck the speaker connections and
The MD will not play.
speaker placement.
YMoisture condensation has built up.
Remove the MD and leave the system
turned on for several hours until the
CD Playermoisture evaporates.
YInsert the MD in the direction of the
The CD tray does not close.arrow.
YThe CD is not placed properly.YNothing is recorded on the MD.
Recording is not possible.
The CD will not eject.
YThe CD has tape, seals, or paste on it.YThe MD is protected against erasure.
(OMD Protected� appears.) Slide the tab
The CD will not play.to close the slot (see page 33).
YThe CD is dirty.YConnect the sound source properly.
YThe CD is inserted label side down.YA pre-recorded MD is in the deck.
YMoisture condensation has built up.Replace the disc with a recordable MD.
Remove the CD and leave the systemYReplace the disc with a recordable MD
turned on for about an hour until thethat has sufficient time remaining or erase
moisture evaporates.unnecessary tracks.
YThe AC power cord was unplugged or a
Play does not start from the first track.power interruption occurred during
YThe player is in program or shuffle mode.
recording. Start recording over from the
Press CONTINUE.
beginning.
OOVER� is displayed.
Recording cannot be made on all MDs
YYou have reached the end of the CD.
during CD-MD Synchro Recording
Press 0 or turn MULTI JOG to return to
the beginning of the CD.YEither CD or MD is not inserted in the
same disc number.
The CD indicator lights up when no CDs
OOVER� is displayed.
are inserted in the disc tray.YYou have reached the end of the MD.
YThe CD indicator lights up when you
Press 0 or turn MULTI JOG to return to
turn on the system for the first time. It
will go off after a while.the beginning of the MD.
YLast time you used the system, you
turned it off with the disc tray opened. It
will go off after a while. If not, press
CD 6 several times to open and close the
disc tray.
66 |
ACEC
SONY
