OPERATIONS
[Starting playback with cross fader]
FADER START FUNCTION
1 Press the FADER START button for the channel (CH-1 to
CH-6) connected to the CD player you wish to control.
By using a control cable to connect the unit to an optional÷ The button of the selected channel will light.
PIONEER CD player, playback on the CD player can be2 Set the CROSS FADER ASSIGN switch of the selected
started using the channel fader or cross fader functions (if achannel to either [A] or [B].
digital link connection is made, use of the control cable is÷ When assigning to channel A (left side) of the cross fader,
unnecessary).set to [A].
÷ When assigning to channel B (right side) of the cross fader,
The CD playerOs pause function is canceled when the
set to [B].
mixerOs channel fader slider or cross fader slider is moved,
3 Move the cross fader slider as far as it will go to the
and the playback of the track starts automatically and
opposite side of the channel you wish to start.
instantly. In addition, by returning the fader to itOs former
4 Set a cue point on the CD player, and set to standby at
position, the CD playerOs playback can be returned back to
the cue point.
the cue point (back cue), so that sampler-like playback can
÷ If a cue point has already been set, the CD player does not
be performed.
have to be set to standby at the cue point.
5 Move the cross fader slider at the desired timing to start
[Cross fader start play & back cue play]
playback.
During cue point standby on the CD player assigned to÷ CD player will start playback.
channel A of the cross fader, moving the cross fader slider÷ After playback has started, by moving the cross fader slider
from the right side (B side) to the left side (A side) causesall the way, the CD player assigned at the opposite side will
the CD player connected to channel A to start playback.return to cue point and enter standby mode (back cue).
When the cross fader slider reaches the left side (A side),* The fader start function may not operate properly when
the CD player assigned to channel B will back cue (return todigital connections are made alone. In this event, connect
cue point). When the CD player assigned to channel B is inthe CD player's analog connectors as well.
cue point standby mode, moving the cross fader slider
from the left side (A side) to the right side (B side), causesUSING EXTERNAL EFFECTORS
playback on the CD player assigned to channel B to begin.
When the cross fader slider reaches the right side (B side),
Two effectors can be connected if desired.
the CD player assigned to channel A will back cue.
1. Use the SEND channel selector switch to choose the
* Back cue will occur even if the input selector switch is
source to be sent to the effector.
not set to [CD/LINE].
÷ Select from either [MIC], channel [1]-[6], or [MASTER].
2. Use the SEND/RETURN selector switch to choose the
stage to which the effector is connected.
÷ When the send channel is set to [MIC], [INSERT] and [AUX]
switching only are enabled from the same point for both
[PRE] and [POST]. When send channel is set to [MASTER],
-26+6
only [INSERT] is enabled.
PRE INSERT:
Equalizer output, sent from before the channel fader and
returned to same point.
POST INSERT:
Channel fader output, sent from before the cross fader
assign, and returned to the same point.
AUX:
Channel fader output, sent from before the cross fader
assign and returned to the point before the master fader,
and then added to any other output. The original sound
which has been sent will also be passed through the cross
fader assign and added.
External effector3. Set the SEND/RETURN button to ON.
÷ The SEND/RETURN button flashes.
4. Adjust the RETURN volume with the RETURN dial
[Starting playback with channel fader]
(LEVEL).
1 Press the FADER START button for the channel (CH-1 to
CH-6) connected to the CD player you wish to control.Position
÷ The button of the selected channel will light.
PRE POST AUXPRE POST AUXPRE POST AUX
SourceINSERTINSERTINSERT
2 Move the channel fader slider to the [0] position.
MIC INSERT AUX
3 Set a cue point in the CD player, and set to standby at
CH-1 ? CH-6 PRE POST AUX
cue point.
MASTER INSERT
÷ If a cue point has already been set, the CD player does
not have to be set to standby at the cue point.EQUALIZERCH. FADERC. F. ASSIGN CROSS FADERMASTER FADER
4 Move channel fader slider at the desired timing to startSEND/RETURNSEND/RETURN
playback.ONON
ON
÷ CD player will start playback.LEVELLEVELSEND/RETURN
÷ After playback has started, moving the channel faderPOSTLEVEL
slider back to [0] causes the CD player to return to cuePOST INSERTINSERT
PRE
point and enter standby mode (back cue).PRE INSERTAUXINSERTAUX
* Channel fader is enabled for control only when CROSS
FADER ASSIGN switch is set to [THRU].SENDRETURN
14 |
ACEC
PIONEER
