DMC-LC80.book 114 k 9�9�9a237676279a9a 1
Others
Troubleshooting
Operational difficulties may be improved malfunction. You can select it on
by restoring the initial settings on the the setup menu.
[SETUP] menu. Select [RESET] on the 3:The brightness of the screen
SETUP menu and reset the Setup becomes dark or bright for a
parameters.moment.
1:The camera is not turned on.3:This phenomenon appears when
1-1: Are the batteries inserted or the pressing the shutter button
AC adaptor (optional, DMW-AC1) halfway to set the aperture value
correctly connected? Check the and does not affect the recorded
connection.pictures.
1-2: Are the batteries sufficiently 4:The picture cannot be recorded.
4-1: Is the card inserted?
charged? Use sufficiently charged 4-2: Is the mode dial correctly set?
batteries (when using Ni-MH Check it.
batteries). Replace them with new 4-3: There is no memory capacity left
batteries (when using Alkaline on the card. Before recording,
batteries).delete some pictures.
2:As the power is turned on, it turns
off immediately.5:The picture is not displayed on
2-1: Is the battery power sufficient to the LCD monitor. (The power
operate the camera? Charge the indicator is lit.)
batteries (when using Ni-MH 5-1: Is the LCD monitor set to OFF?
batteries). Replace them with new 5-2: Does the economy mode work?
batteries (when using Alkaline 5-3: Is the built-in flash charging?
batteries).6:The LCD monitor is too bright
2-2: Are the batteries other than the or dark.
recommended ones?6:Adjust the brightness of the LCD
monitor.
2-3: The remaining battery life of the 7:Flash does not light.
Nickel Manganese battery cannot 7:The flash mode is set to forced
be correctly displayed because of OFF. Change the flash mode.
its characteristics.8:The focus range depends on
2-4: If you press the shutter button recording mode.
halfway without enough power
remaining on the batteries, the 8-1: Set the mode dial to the mode
camera may be turned off. This is corresponding to the distance to
a feature which helps to avoid the subject.
abnormal recordings due to 8-2: Set the [AF TRIGGER] to
insufficient battery power, not a []SHUTTER .
malfunction. Replace the 9:The picture is not played back.
batteries.9-1: Is the card inserted?
2-5: The Power Save is set before 9-2: Is there a picture in the card?
9-3: Is the mode dial set to playback
shipment. Therefore, the camera []?
is turned off in 2 minutes if you do
not operate it. This is not a
114 |
ACEC
PANASONIC
