Adjusting the Video Quality
<When set to [Interlace] in the Setup screen Video 1 Adjusting the picture quality settings
� To create your own setting (2)menu.>
Fine Focus
1 Use the cursor button (3) to select [Start] then press
Switch [On] to reveal greater detail (higher resolution) in the
ENTER.
picture.
Contrast
Adjusts the contrast of the elements in the picture.
Sharpness
Adjusts the sharpness of the high-frequency (detailed) elements
in the picture. (This setting is only effective when [Fine Focus] isInterlace Video Memory Select
Interlace Video Setup
[On].)
Chroma Level
Adjusts how saturated colours appear.2 Use the cursor button ( ) to select [Video Setup] and press
HueENTER.
Adjusts the overall colour balance between red and green. (This3 Press Display.
is only effective when the DVD receiver is connected using the
VIDEO OUT or S-VIDEO OUT jacks.)
Memory (Interlace Memory)DNRoff max
Programs the current settings.SharpnessOn Off
Detailmin max
Chroma Delaymin max
Gammagreen red
MemoryOff12 35 Use the cursor buttons (2/3) to adjust the settings.
Adjust these while a disc is playing to see the effect of changes
immediately.
6 Repeat steps 4 and 5 to make adjustments to other
4 Use the cursor buttons (5/ ) to select the setting and use
settings.
the cursor buttons (2/3) to adjust the settings.
If you would like to save the settings in the DVD receiverOs
Adjust these while a disc is playing to see the effect of changes
memory, be sure to select either [1], [2], or [3] in the [Prog.
immediately.
Memory] or [Memory (Interlace Memory)] setting to establish
5 To memorize the setting, select Memory 1, 2, 3, then press
which memory location to save the new settings in. Please note
ENTER.
that if you select a location where settings have already been
The previous setting will be erased.
saved, the old settings will be replaced by the new ones.
Prog. MemoryOff 1 2 3
MoveSelectDISPLAYENTERCheck
7 When you are finished making adjustments, press ENTER
to establish the new settings.
71 |
ACEC
ONKYO
