SAFETY PRECAUTIONS
In order to prevent any fatal accidents caused by
misoperation or mishandling the monitor, be fully aware of all
the following precautions.
WARNINGSFCC NOTICE (U.S.A. only)
To prevent fire or shock hazard, do not expose thisCAUTION: Changes or modifications not approved by
monitor to rain or moisture. Dangerous high voltagesJVC could void the userOs authority to operate the
are present inside the unit. Do not remove the backequipment.
cover of the cabinet. When servicing the monitor,
contrast qualified service personnel. Never try toNOTE: This equipment has been tested and found to
service it yourself.comply with the limits for a Class A digital device,
pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful
interference when the equipment is operated in a
WARNING : THIS APPARATUScommercial environment. This equipment generates,
MUST BE EARTHED.uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instruction
manual, may cause harmful interference to radio
Improper operations, in particular alternation of highcommunications. Operation of this equipment in a
voltage or changing the type of tube may result in x-rayresidential area is likely to cause harmful interference in
emission of considerable dose. A unit altered in such a
way no longer meets the standards of certification, andwhich case the user will be required to correct the
must therefore no longer be operated.interference at his own expense.
This monitor is equipped with a 3-blade grounding-type
plug to satisfy FCC rule. If you are unable to insert the
plug into the outlet, contact your electrician.
PRECAUTIONS HANDLING
I Use only the power source specified on the unit.I Avoid shocks or vibrations. These may damage the unit and
(120 V/230 V AC, 50 Hz/60 Hz)cause it to malfunction.
I Keep flammable material, water, and metal objects awayI Do not block the ventilation slots.
from the unit � especially the interior of the unit.I Do not expose this unit to high temperatures.
I This unit incorporates high voltage circuitry.Extended exposure to direct sunlight or a heater could
For your own safety and that of your equipment, do notdeform the cabinet or cause the performance of internal
attempt to modify or disassemble this monitor.components to deteriorate.
There are no user-serviceable parts inside.I Do not place the unit near appliances generating strong
I Video or audio signals cannot be input to this monitorelectric or magnetic fields. There can generate picture noise
without optional input cards.and instability.
I In these instructions, all explanations (except where noted)I Keep the monitor clean by wiping the cabinet and CRT
refer to the DT-V1700CG with input cards installed.screen with a piece of soft cloth. Do not apply thinner or
benzine. These chemicals can damage the finish and erase
printed letters. When the unit is excessively dirty, use a
diluted neutral cleanser, then wipe away the cleanser with a
dry cloth.
SCREEN BURNDEGAUSS
I It is not recommended to keep a certain still imageI Do not use a magnet eraser to degauss the monitorOs
displayed on screen for a long time as well as displayingcathode ray tube from the outside. Doing so may distort its
extremely bright images on screen. This may cause aaperture grill and cause a malfunction.
burning (sticking) phenomenon on the screen of cathode-ray
tube. This problem does not occur as far as displaying
normal video playback motion images.
2
LCT1002-001A(EN)401.7.13, 4:14 PM |
ACEC
JVC
